Operating System Error Codes

Use este forum para coisas que não tem nada a ver com Oracle.
Responder
diegolenhardt
Moderador
Moderador
Mensagens: 1177
Registrado em: Qui, 15 Out 2009 10:28 am
Localização: Recife

As vezes recebemos mensagem de erro em aplicativos, porem são mensagens do sistema operacional, como I/O Error 51, por exemplo, abaixo uma tabela com todos:

Selecionar tudo

Code
 Description
 Name
 
0
 The operation completed successfully.
 ERROR_SUCCESS
 
1
 Incorrect function.
 ERROR_INVALID_FUNCTION
 
2
 The system cannot find the file specified.
 ERROR_FILE_NOT_FOUND
 
3
 The system cannot find the path specified.
 ERROR_PATH_NOT_FOUND
 
4
 The system cannot open the file.
 ERROR_TOO_MANY_OPEN_FILES
 
5
 Access is denied.
 ERROR_ACCESS_DENIED
 
6
 The handle is invalid.
 ERROR_INVALID_HANDLE
 
7
 The storage control blocks were destroyed.
 ERROR_ARENA_TRASHED
 
8
 Not enough storage is available to process this command.
 ERROR_NOT_ENOUGH_MEMORY
 
9
 The storage control block address is invalid.
 ERROR_INVALID_BLOCK
 
10
 The environment is incorrect.
 ERROR_BAD_ENVIRONMENT
 
11
 An attempt was made to load a program with an incorrect format.
 ERROR_BAD_FORMAT
 
12
 The access code is invalid.
 ERROR_INVALID_ACCESS
 
13
 The data is invalid.
 ERROR_INVALID_DATA
 
14
 Not enough storage is available to complete this operation.
 ERROR_OUTOFMEMORY
 
15
 The system cannot find the drive specified.
 ERROR_INVALID_DRIVE
 
16
 The directory cannot be removed.
 ERROR_CURRENT_DIRECTORY
 
17
 The system cannot move the file to a different disk drive.
 ERROR_NOT_SAME_DEVICE
 
18
 There are no more files.
 ERROR_NO_MORE_FILES
 
19
 The media is write protected.
 ERROR_WRITE_PROTECT
 
20
 The system cannot find the device specified.
 ERROR_BAD_UNIT
 
21
 The device is not ready.
 ERROR_NOT_READY
 
22
 The device does not recognize the command.
 ERROR_BAD_COMMAND
 
23
 Data error (cyclic redundancy check).
 ERROR_CRC
 
24
 The program issued a command but the command length is incorrect.
 ERROR_BAD_LENGTH
 
25
 The drive cannot locate a specific area or track on the disk.
 ERROR_SEEK
 
26
 The specified disk or diskette cannot be accessed.
 ERROR_NOT_DOS_DISK
 
27
 The drive cannot find the sector requested.
 ERROR_SECTOR_NOT_FOUND
 
28
 The printer is out of paper.
 ERROR_OUT_OF_PAPER
 
29
 The system cannot write to the specified device.
 ERROR_WRITE_FAULT
 
30
 The system cannot read from the specified device.
 ERROR_READ_FAULT
 
31
 A device attached to the system is not functioning.
 ERROR_GEN_FAILURE
 
32
 The process cannot access the file because it is being used by another process.
 ERROR_SHARING_VIOLATION
 
33
 The process cannot access the file because another process has locked a portion of the file.
 ERROR_LOCK_VIOLATION
 
34
 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
 ERROR_WRONG_DISK
 
36
 Too many files opened for sharing.
 ERROR_SHARING_BUFFER_EXCEEDED
 
38
 Reached the end of the file.
 ERROR_HANDLE_EOF
 
39
 The disk is full.
 ERROR_HANDLE_DISK_FULL
 
50
 The network request is not supported.
 ERROR_NOT_SUPPORTED
 
51
 The remote computer is not available.
 ERROR_REM_NOT_LIST
 
52
 A duplicate name exists on the network.
 ERROR_DUP_NAME
 
53
 The network path was not found.
 ERROR_BAD_NETPATH
 
54
 The network is busy.
 ERROR_NETWORK_BUSY
 
55
 The specified network resource or device is no longer available.
 ERROR_DEV_NOT_EXIST
 
56
 The network BIOS command limit has been reached.
 ERROR_TOO_MANY_CMDS
 
57
 A network adapter hardware error occurred.
 ERROR_ADAP_HDW_ERR
 
58
 The specified server cannot perform the requested operation.
 ERROR_BAD_NET_RESP
 
59
 An unexpected network error occurred.
 ERROR_UNEXP_NET_ERR
 
60
 The remote adapter is not compatible.
 ERROR_BAD_REM_ADAP
 
61
 The printer queue is full.
 ERROR_PRINTQ_FULL
 
62
 Space to store the file waiting to be printed is not available on the server.
 ERROR_NO_SPOOL_SPACE
 
63
 Your file waiting to be printed was deleted.
 ERROR_PRINT_CANCELLED
 
64
 The specified network name is no longer available.
 ERROR_NETNAME_DELETED
 
65
 Network access is denied.
 ERROR_NETWORK_ACCESS_DENIED
 
66
 The network resource type is not correct.
 ERROR_BAD_DEV_TYPE
 
67
 The network name cannot be found.
 ERROR_BAD_NET_NAME
 
68
 The name limit for the local computer network adapter card was exceeded.
 ERROR_TOO_MANY_NAMES
 
69
 The network BIOS session limit was exceeded.
 ERROR_TOO_MANY_SESS
 
70
 The remote server has been paused or is in the process of being started.
 ERROR_SHARING_PAUSED
 
71
 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
 ERROR_REQ_NOT_ACCEP
 
72
 The specified printer or disk device has been paused.
 ERROR_REDIR_PAUSED
 
80
 The file exists.
 ERROR_FILE_EXISTS
 
82
 The directory or file cannot be created.
 ERROR_CANNOT_MAKE
 
83
 Fail on INT 24.
 ERROR_FAIL_I24
 
84
 Storage to process this request is not available.
 ERROR_OUT_OF_STRUCTURES
 
85
 The local device name is already in use.
 ERROR_ALREADY_ASSIGNED
 
86
 The specified network password is not correct.
 ERROR_INVALID_PASSWORD
 
87
 The parameter is incorrect.
 ERROR_INVALID_PARAMETER
 
88
 A write fault occurred on the network.
 ERROR_NET_WRITE_FAULT
 
89
 The system cannot start another process at this time.
 ERROR_NO_PROC_SLOTS
 
100
 Cannot create another system semaphore.
 ERROR_TOO_MANY_SEMAPHORES
 
101
 The exclusive semaphore is owned by another process.
 ERROR_EXCL_SEM_ALREADY_OWNED
 
102
 The semaphore is set and cannot be closed.
 ERROR_SEM_IS_SET
 
103
 The semaphore cannot be set again.
 ERROR_TOO_MANY_SEM_REQUESTS
 
104
 Cannot request exclusive semaphores at interrupt time.
 ERROR_INVALID_AT_INTERRUPT_TIME
 
105
 The previous ownership of this semaphore has ended.
 ERROR_SEM_OWNER_DIED
 
106
 Insert the diskette for drive %1.
 ERROR_SEM_USER_LIMIT
 
107
 The program stopped because an alternate diskette was not inserted.
 ERROR_DISK_CHANGE
 
108
 The disk is in use or locked by another process.
 ERROR_DRIVE_LOCKED
 
109
 The pipe has been ended.
 ERROR_BROKEN_PIPE
 
110
 The system cannot open the device or file specified.
 ERROR_OPEN_FAILED
 
111
 The file name is too long.
 ERROR_BUFFER_OVERFLOW
 
112
 There is not enough space on the disk.
 ERROR_DISK_FULL
 
113
 No more internal file identifiers available.
 ERROR_NO_MORE_SEARCH_HANDLES
 
114
 The target internal file identifier is incorrect.
 ERROR_INVALID_TARGET_HANDLE
 
117
 The IOCTL call made by the application program is not correct.
 ERROR_INVALID_CATEGORY
 
118
 The verify-on-write switch parameter value is not correct.
 ERROR_INVALID_VERIFY_SWITCH
 
119
 The system does not support the command requested.
 ERROR_BAD_DRIVER_LEVEL
 
120
 This function is not valid on this platform.
 ERROR_CALL_NOT_IMPLEMENTED
 
121
 The semaphore time-out period has expired.
 ERROR_SEM_TIMEOUT
 
122
 The data area passed to a system call is too small.
 ERROR_INSUFFICIENT_BUFFER
 
123
 The filename, directory name, or volume label syntax is incorrect.
 ERROR_INVALID_NAME
 
124
 The system call level is not correct.
 ERROR_INVALID_LEVEL
 
125
 The disk has no volume label.
 ERROR_NO_VOLUME_LABEL
 
126
 The specified module could not be found.
 ERROR_MOD_NOT_FOUND
 
127
 The specified procedure could not be found.
 ERROR_PROC_NOT_FOUND
 
128
 There are no child processes to wait for.
 ERROR_WAIT_NO_CHILDREN
 
129
 The %1 application cannot be run in Windows NT mode.
 ERROR_CHILD_NOT_COMPLETE
 
130
 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
 ERROR_DIRECT_ACCESS_HANDLE
 
131
 An attempt was made to move the file pointer before the beginning of the file.
 ERROR_NEGATIVE_SEEK
 
132
 The file pointer cannot be set on the specified device or file.
 ERROR_SEEK_ON_DEVICE
 
133
 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
 ERROR_IS_JOIN_TARGET
 
134
 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
 ERROR_IS_JOINED
 
135
 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
 ERROR_IS_SUBSTED
 
136
 The system tried to delete the JOIN of a drive that is not joined.
 ERROR_NOT_JOINED
 
137
 The system tried to delete the substitution of a drive that is not substituted.
 ERROR_NOT_SUBSTED
 
138
 The system tried to join a drive to a directory on a joined drive.
 ERROR_JOIN_TO_JOIN
 
139
 The system tried to substitute a drive to a directory on a substituted drive.
 ERROR_SUBST_TO_SUBST
 
140
 The system tried to join a drive to a directory on a substituted drive.
 ERROR_JOIN_TO_SUBST
 
141
 The system tried to SUBST a drive to a directory on a joined drive.
 ERROR_SUBST_TO_JOIN
 
142
 The system cannot perform a JOIN or SUBST at this time.
 ERROR_BUSY_DRIVE
 
143
 The system cannot join or substitute a drive to or for a directory on the same drive.
 ERROR_SAME_DRIVE
 
144
 The directory is not a subdirectory of the root directory.
 ERROR_DIR_NOT_ROOT
 
145
 The directory is not empty.
 ERROR_DIR_NOT_EMPTY
 
146
 The path specified is being used in a substitute.
 ERROR_IS_SUBST_PATH
 
147
 Not enough resources are available to process this command.
 ERROR_IS_JOIN_PATH
 
148
 The path specified cannot be used at this time.
 ERROR_PATH_BUSY
 
149
 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
 ERROR_IS_SUBST_TARGET
 
150
 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
 ERROR_SYSTEM_TRACE
 
151
 The number of specified semaphore events for DosMuxSemWait is not correct.
 ERROR_INVALID_EVENT_COUNT
 
152
 DosMuxSemWait did not execute; too many semaphores are already set.
 ERROR_TOO_MANY_MUXWAITERS
 
153
 The DosMuxSemWait list is not correct.
 ERROR_INVALID_LIST_FORMAT
 
154
 The volume label you entered exceeds the label character limit of the target file system.
 ERROR_LABEL_TOO_LONG
 
155
 Cannot create another thread.
 ERROR_TOO_MANY_TCBS
 
156
 The recipient process has refused the signal.
 ERROR_SIGNAL_REFUSED
 
157
 The segment is already discarded and cannot be locked.
 ERROR_DISCARDED
 
158
 The segment is already unlocked.
 ERROR_NOT_LOCKED
 
159
 The address for the thread ID is not correct.
 ERROR_BAD_THREADID_ADDR
 
160
 The argument string passed to DosExecPgm is not correct.
 ERROR_BAD_ARGUMENTS
 
161
 The specified path is invalid.
 ERROR_BAD_PATHNAME
 
162
 A signal is already pending.
 ERROR_SIGNAL_PENDING
 
164
 No more threads can be created in the system.
 ERROR_MAX_THRDS_REACHED
 
167
 Unable to lock a region of a file.
 ERROR_LOCK_FAILED
 
170
 The requested resource is in use.
 ERROR_BUSY
 
173
 A lock request was not outstanding for the supplied cancel region.
 ERROR_CANCEL_VIOLATION
 
174
 The file system does not support atomic changes to the lock type.
 ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
 
180
 The system detected a segment number that was not correct.
 ERROR_INVALID_SEGMENT_NUMBER
 
182
 The operating system cannot run %1.
 ERROR_INVALID_ORDINAL
 
183
 Cannot create a file when that file already exists.
 ERROR_ALREADY_EXISTS
 
186
 The flag passed is not correct.
 ERROR_INVALID_FLAG_NUMBER
 
187
 The specified system semaphore name was not found.
 ERROR_SEM_NOT_FOUND
 
188
 The operating system cannot run %1.
 ERROR_INVALID_STARTING_CODESEG
 
189
 The operating system cannot run %1.
 ERROR_INVALID_STACKSEG
 
190
 The operating system cannot run %1.
 ERROR_INVALID_MODULETYPE
 
191
 Cannot run %1 in Windows NT mode.
 ERROR_INVALID_EXE_SIGNATURE
 
192
 The operating system cannot run %1.
 ERROR_EXE_MARKED_INVALID
 
193
 Is not a valid application.
 ERROR_BAD_EXE_FORMAT
 
194
 The operating system cannot run %1.
 ERROR_ITERATED_DATA_EXCEEDS_64k
 
195
 The operating system cannot run %1.
 ERROR_INVALID_MINALLOCSIZE
 
196
 The operating system cannot run this application program.
 ERROR_DYNLINK_FROM_INVALID_RING
 
197
 The operating system is not presently configured to run this application.
 ERROR_IOPL_NOT_ENABLED
 
198
 The operating system cannot run %1.
 ERROR_INVALID_SEGDPL
 
199
 The operating system cannot run this application program.
 ERROR_AUTODATASEG_EXCEEDS_64k
 
200
 The code segment cannot be greater than or equal to 64K.
 ERROR_RING2SEG_MUST_BE_MOVABLE
 
201
 The operating system cannot run %1.
 ERROR_RELOC_CHAIN_XEEDS_SEGLIM
 
202
 The operating system cannot run %1.
 ERROR_INFLOOP_IN_RELOC_CHAIN
 
203
 The system could not find the environment option that was entered.
 ERROR_ENVVAR_NOT_FOUND
 
205
 No process in the command subtree has a signal handler.
 ERROR_NO_SIGNAL_SENT
 
206
 The filename or extension is too long.
 ERROR_FILENAME_EXCED_RANGE
 
207
 The ring 2 stack is in use.
 ERROR_RING2_STACK_IN_USE
 
208
 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
 ERROR_META_EXPANSION_TOO_LONG
 
209
 The signal being posted is not correct.
 ERROR_INVALID_SIGNAL_NUMBER
 
210
 The signal handler cannot be set.
 ERROR_THREAD_1_INACTIVE
 
212
 The segment is locked and cannot be reallocated.
 ERROR_LOCKED
 
214
 Too many dynamic-link modules are attached to this program or dynamic-link module.
 ERROR_TOO_MANY_MODULES
 
215
 Can't nest calls to LoadModule.
 ERROR_NESTING_NOT_ALLOWED
 
216
 The image file %1 is valid, but is for a machine type other than the current machine.
 ERROR_EXE_MACHINE_TYPE_MISMATCH
 
230
 The pipe state is invalid.
 ERROR_BAD_PIPE
 
231
 All pipe instances are busy.
 ERROR_PIPE_BUSY
 
232
 The pipe is being closed.
 ERROR_NO_DATA
 
233
 No process is on the other end of the pipe.
 ERROR_PIPE_NOT_CONNECTED
 
234
 More data is available.
 ERROR_MORE_DATA
 
240
 The session was canceled.
 ERROR_você_DISCONNECTED
 
254
 The specified extended attribute name was invalid.
 ERROR_INVALID_EA_NAME
 
255
 The extended attributes are inconsistent.
 ERROR_EA_LIST_INCONSISTENT
 
259
 No more data is available.
 ERROR_NO_MORE_ITEMS
 
266
 The copy functions cannot be used.
 ERROR_CANNOT_COPY
 
267
 The directory name is invalid.
 ERROR_DIRECTORY
 
275
 The extended attributes did not fit in the buffer.
 ERROR_EAS_DIDNT_FIT
 
276
 The extended attribute file on the mounted file system is corrupt.
 ERROR_EA_FILE_CORRUPT
 
277
 The extended attribute table file is full.
 ERROR_EA_TABLE_FULL
 
278
 The specified extended attribute handle is invalid.
 ERROR_INVALID_EA_HANDLE
 
282
 The mounted file system does not support extended attributes.
 ERROR_EAS_NOT_SUPPORTED
 
288
 Attempt to release mutex not owned by caller.
 ERROR_NOT_OWNER
 
298
 Too many posts were made to a semaphore.
 ERROR_TOO_MANY_POSTS
 
299
 Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
 ERROR_PARTIAL_COPY
 
317
 The system cannot find message text for message number 0x%1 in the message file for %2.
 ERROR_MR_MID_NOT_FOUND
 
487
 Attempt to access invalid address.
 ERROR_INVALID_ADDRESS
 
534
 Arithmetic result exceeded 32 bits.
 ERROR_ARITHMETIC_OVERFLOW
 
535
 There is a process on other end of the pipe.
 ERROR_PIPE_CONNECTED
 
536
 Waiting for a process to open the other end of the pipe.
 ERROR_PIPE_LISTENING
 
994
 Access to the extended attribute was denied.
 ERROR_EA_ACCESS_DENIED
 
995
 The I/O operation has been aborted because of either a thread exit or an application request.
 ERROR_OPERATION_ABORTED
 
996
 Overlapped I/O event is not in a signaled state.
 ERROR_IO_INCOMPLETE
 
997
 Overlapped I/O operation is in progress.
 ERROR_IO_PENDING
 
998
 Invalid access to memory location.
 ERROR_NOACCESS
 
999
 Error performing inpage operation.
 ERROR_SWAPERROR
 
1001
 Recursion too deep; the stack overflowed.
 ERROR_STACK_OVERFLOW
 
1002
 The window cannot act on the sent message.
 ERROR_INVALID_MESSAGE
 
1003
 Cannot complete this function.
 ERROR_CAN_NOT_COMPLETE
 
1004
 Invalid flags.
 ERROR_INVALID_FLAGS
 
1005
 The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
 ERROR_UNRECOGNIZED_VOLUME
 
1006
 The volume for a file has been externally altered so that the opened file is no longer valid.
 ERROR_FILE_INVALID
 
1007
 The requested operation cannot be performed in full-screen mode.
 ERROR_FULLSCREEN_MODE
 
1008
 An attempt was made to reference a token that does not exist.
 ERROR_NO_TOKEN
 
1009
 The configuration registry database is corrupt.
 ERROR_BADDB
 
1010
 The configuration registry key is invalid.
 ERROR_BADKEY
 
1011
 The configuration registry key could not be opened.
 ERROR_CANTOPEN
 
1012
 The configuration registry key could not be read.
 ERROR_CANTREAD
 
1013
 The configuration registry key could not be written.
 ERROR_CANTWRITE
 
1014
 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
 ERROR_REGISTRY_RECOVERED
 
1015
 The registry is corrupted. The structure of one of the files that contains registry data is corrupted, or the system's image of the file in memory is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
 ERROR_REGISTRY_CORRUPT
 
1016
 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
 ERROR_REGISTRY_IO_FAILED
 
1017
 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
 ERROR_NOT_REGISTRY_FILE
 
1018
 Illegal operation attempted on a registry key that has been marked for deletion.
 ERROR_KEY_DELETED
 
1019
 System could not allocate the required space in a registry log.
 ERROR_NO_LOG_SPACE
 
1020
 Cannot create a symbolic link in a registry key that already has subkeys or values.
 ERROR_KEY_HAS_CHILDREN
 
1021
 Cannot create a stable subkey under a volatile parent key.
 ERROR_CHILD_MUST_BE_VOLATILE
 
1022
 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
 ERROR_NOTIFY_ENUM_DIR
 
1051
 A stop control has been sent to a service that other running services are dependent on.
 ERROR_DEPENDENT_SERVICES_RUNNING
 
1052
 The requested control is not valid for this service.
 ERROR_INVALID_SERVICE_CONTROL
 
1053
 The service did not respond to the start or control request in a timely fashion.
 ERROR_SERVICE_REQUEST_TIMEOUT
 
1054
 A thread could not be created for the service.
 ERROR_SERVICE_NO_THREAD
 
1055
 The service database is locked.
 ERROR_SERVICE_DATABASE_LOCKED
 
1056
 An instance of the service is already running.
 ERROR_SERVICE_ALREADY_RUNNING
 
1057
 The account name is invalid or does not exist.
 ERROR_INVALID_SERVICE_ACCOUNT
 
1058
 The specified service is disabled and cannot be started.
 ERROR_SERVICE_DISABLED
 
1059
 Circular service dependency was specified.
 ERROR_CIRCULAR_DEPENDENCY
 
1060
 The specified service does not exist as an installed service.
 ERROR_SERVICE_DOES_NOT_EXIST
 
1061
 The service cannot accept control messages at this time.
 ERROR_SERVICE_CANNOT_ACCEPT_CTRL
 
1062
 The service has not been started.
 ERROR_SERVICE_NOT_ACTIVE
 
1063
 The service process could not connect to the service controller.
 ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
 
1064
 An exception occurred in the service when handling the control request.
 ERROR_EXCEPTION_IN_SERVICE
 
1065
 The database specified does not exist.
 ERROR_DATABASE_DOES_NOT_EXIST
 
1066
 The service has returned a service-specific error code.
 ERROR_SERVICE_SPECIFIC_ERROR
 
1067
 The process terminated unexpectedly.
 ERROR_PROCESS_ABORTED
 
1068
 The dependency service or group failed to start.
 ERROR_SERVICE_DEPENDENCY_FAIL
 
1069
 The service did not start due to a logon failure.
 ERROR_SERVICE_LOGON_FAILED
 
1070
 After starting, the service hung in a start-pending state.
 ERROR_SERVICE_START_HANG
 
1071
 The specified service database lock is invalid.
 ERROR_INVALID_SERVICE_LOCK
 
1072
 The specified service has been marked for deletion.
 ERROR_SERVICE_MARKED_FOR_DELETE
 
1073
 The specified service already exists.
 ERROR_SERVICE_EXISTS
 
1074
 The system is currently running with the last-known-good configuration.
 ERROR_ALREADY_RUNNING_LKG
 
1075
 The dependency service does not exist or has been marked for deletion.
 ERROR_SERVICE_DEPENDENCY_DELETED
 
1076
 The current boot has already been accepted for use as the last-known-good control set.
 ERROR_BOOT_ALREADY_ACCEPTED
 
1077
 No attempts to start the service have been made since the last boot.
 ERROR_SERVICE_NEVER_STARTED
 
1078
 The name is already in use as either a service name or a service display name.
 ERROR_DUPLICATE_SERVICE_NAME
 
1079
 The account specified for this service is different from the account specified for other services running in the same process.
 ERROR_DIFFERENT_SERVICE_ACCOUNT
 
1100
 The physical end of the tape has been reached.
 ERROR_END_OF_MEDIA
 
1101
 A tape access reached a filemark.
 ERROR_FILEMARK_DETECTED
 
1102
 The beginning of the tape or partition was encountered.
 ERROR_BEGINNING_OF_MEDIA
 
1103
 A tape access reached the end of a set of files.
 ERROR_SETMARK_DETECTED
 
1104
 No more data is on the tape.
 ERROR_NO_DATA_DETECTED
 
1105
 Tape could not be partitioned.
 ERROR_PARTITION_FAILURE
 
1106
 When accessing a new tape of a multivolume partition, the current block size is incorrect.
 ERROR_INVALID_BLOCK_LENGTH
 
1107
 Tape partition information could not be found when loading a tape.
 ERROR_DEVICE_NOT_PARTITIONED
 
1108
 Unable to lock the media eject mechanism.
 ERROR_UNABLE_TO_LOCK_MEDIA
 
1109
 Unable to unload the media.
 ERROR_UNABLE_TO_UNLOAD_MEDIA
 
1110
 The media in the drive may have changed.
 ERROR_MEDIA_CHANGED
 
1111
 The I/O bus was reset.
 ERROR_BUS_RESET
 
1112
 No media in drive.
 ERROR_NO_MEDIA_IN_DRIVE
 
1113
 No mapping for the Unicode character exists in the target multibyte code page.
 ERROR_NO_UNICODE_TRANSLATION
 
1114
 A dynamic link library (DLL) initialization routine failed.
 ERROR_DLL_INIT_FAILED
 
1115
 A system shutdown is in progress.
 ERROR_SHUTDOWN_IN_PROGRESS
 
1116
 Unable to abort the system shutdown because no shutdown was in progress.
 ERROR_NO_SHUTDOWN_IN_PROGRESS
 
1117
 The request could not be performed because of an I/O device error.
 ERROR_IO_DEVICE
 
1118
 No serial device was successfully initialized. The serial driver will unload.
 ERROR_SERIAL_NO_DEVICE
 
1119
 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
 ERROR_IRQ_BUSY
 
1120
 A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
 ERROR_MORE_WRITES
 
1121
 A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
 ERROR_COUNTER_TIMEOUT
 
1122
 No ID address mark was found on the floppy disk.
 ERROR_FLOPPY_ID_MARK_NOT_FOUND
 
1123
 Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
 ERROR_FLOPPY_WRONG_CYLINDER
 
1124
 The floppy disk controller reported an error that is not recognized by the floppy disk driver.
 ERROR_FLOPPY_UNKNOWN_ERROR
 
1125
 The floppy disk controller returned inconsistent results in its registers.
 ERROR_FLOPPY_BAD_REGISTERS
 
1126
 While accessing the hard disk, a recalibrate operation failed, even after retries.
 ERROR_DISK_RECALIBRATE_FAILED
 
1127
 While accessing the hard disk, a disk operation failed even after retries.
 ERROR_DISK_OPERATION_FAILED
 
1128
 While accessing the hard disk, a disk controller reset was needed, but even that failed.
 ERROR_DISK_RESET_FAILED
 
1129
 Physical end of tape encountered.
 ERROR_EOM_OVERFLOW
 
1130
 Not enough server storage is available to process this command.
 ERROR_NOT_ENOUGH_SERVER_MEMORY
 
1131
 A potential deadlock condition has been detected.
 ERROR_POSSIBLE_DEADLOCK
 
1132
 The base address or the file offset specified does not have the proper alignment.
 ERROR_MAPPED_ALIGNMENT
 
1140
 An attempt to change the system power state was vetoed by another application or driver.
 ERROR_SET_POWER_STATE_VETOED
 
1141
 The system BIOS failed an attempt to change the system power state.
 ERROR_SET_POWER_STATE_FAILED
 
1142
 An attempt was made to create more links on a file than the file system supports.
 ERROR_TOO_MANY_LINKS
 
1150
 The specified program requires a newer version of Windows.
 ERROR_OLD_WIN_VERSION
 
1151
 The specified program is not a Windows or MS-DOS program.
 ERROR_APP_WRONG_OS
 
1152
 Cannot start more than one instance of the specified program.
 ERROR_SINGLE_INSTANCE_APP
 
1153
 The specified program was written for an earlier version of Windows.
 ERROR_RMODE_APP
 
1154
 One of the library files needed to run this application is damaged.
 ERROR_INVALID_DLL
 
1155
 No application is associated with the specified file for this operation.
 ERROR_NO_ASSOCIATION
 
1156
 An error occurred in sending the command to the application.
 ERROR_DDE_FAIL
 
1157
 One of the library files needed to run this application cannot be found.
 ERROR_DLL_NOT_FOUND
 
1200
 The specified device name is invalid.
 ERROR_BAD_DEVICE
 
1201
 The device is not currently connected but it is a remembered connection.
 ERROR_CONNECTION_UNAVAIL
 
1202
 An attempt was made to remember a device that had previously been remembered.
 ERROR_DEVICE_ALREADY_REMEMBERED
 
1203
 No network provider accepted the given network path.
 ERROR_NO_NET_OR_BAD_PATH
 
1204
 The specified network provider name is invalid.
 ERROR_BAD_PROVIDER
 
1205
 Unable to open the network connection profile.
 ERROR_CANNOT_OPEN_PROFILE
 
1206
 The network connection profile is corrupt.
 ERROR_BAD_PROFILE
 
1207
 Cannot enumerate a noncontainer.
 ERROR_NOT_CONTAINER
 
1208
 An extended error has occurred.
 ERROR_EXTENDED_ERROR
 
1209
 The format of the specified group name is invalid.
 ERROR_INVALID_GROUPNAME
 
1210
 The format of the specified computer name is invalid.
 ERROR_INVALID_COMPUTERNAME
 
1211
 The format of the specified event name is invalid.
 ERROR_INVALID_EVENTNAME
 
1212
 The format of the specified domain name is invalid.
 ERROR_INVALID_DOMAINNAME
 
1213
 The format of the specified service name is invalid.
 ERROR_INVALID_SERVICENAME
 
1214
 The format of the specified network name is invalid.
 ERROR_INVALID_NETNAME
 
1215
 The format of the specified share name is invalid.
 ERROR_INVALID_SHARENAME
 
1216
 The format of the specified password is invalid.
 ERROR_INVALID_PASSWORDNAME
 
1217
 The format of the specified message name is invalid.
 ERROR_INVALID_MESSAGENAME
 
1218
 The format of the specified message destination is invalid.
 ERROR_INVALID_MESSAGEDEST
 
1219
 The credentials supplied conflict with an existing set of credentials.
 ERROR_SESSION_CREDENTIAL_CONFLICT
 
1220
 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
 ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
 
1221
 The workgroup or domain name is already in use by another computer on the network.
 ERROR_DUP_DOMAINNAME
 
1222
 The network is not present or not started.
 ERROR_NO_NETWORK
 
1223
 The operation was canceled by the user.
 ERROR_CANCELLED
 
1224
 The requested operation cannot be performed on a file with a user-mapped section open.
 ERROR_USER_MAPPED_FILE
 
1225
 The remote system refused the network connection.
 ERROR_CONNECTION_REFUSED
 
1226
 The network connection was gracefully closed.
 ERROR_GRACEFUL_DISCONNECT
 
1227
 The network transport endpoint already has an address associated with it.
 ERROR_ADDRESS_ALREADY_ASSOCIATED
 
1228
 An address has not yet been associated with the network endpoint.
 ERROR_ADDRESS_NOT_ASSOCIATED
 
1229
 An operation was attempted on a nonexistent network connection.
 ERROR_CONNECTION_INVALID
 
1230
 An invalid operation was attempted on an active network connection.
 ERROR_CONNECTION_ACTIVE
 
1231
 The remote network is not reachable by the transport.
 ERROR_NETWORK_UNREACHABLE
 
1232
 The remote system is not reachable by the transport.
 ERROR_HOST_UNREACHABLE
 
1233
 The remote system does not support the transport protocol.
 ERROR_PROTOCOL_UNREACHABLE
 
1234
 No service is operating at the destination network endpoint on the remote system.
 ERROR_PORT_UNREACHABLE
 
1235
 The request was aborted.
 ERROR_REQUEST_ABORTED
 
1236
 The network connection was aborted by the local system.
 ERROR_CONNECTION_ABORTED
 
1237
 The operation could not be completed. A retry should be performed.
 ERROR_RETRY
 
1238
 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
 ERROR_CONNECTION_COUNT_LIMIT
 
1239
 Attempting to log in during an unauthorized time of day for this account.
 ERROR_LOGIN_TIME_RESTRICTION
 
1240
 The account is not authorized to log in from this station.
 ERROR_LOGIN_WKSTA_RESTRICTION
 
1241
 The network address could not be used for the operation requested.
 ERROR_INCORRECT_ADDRESS
 
1242
 The service is already registered.
 ERROR_ALREADY_REGISTERED
 
1243
 The specified service does not exist.
 ERROR_SERVICE_NOT_FOUND
 
1244
 The operation being requested was not performed because the user has not been authenticated.
 ERROR_NOT_AUTHENTICATED
 
1245
 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
 ERROR_NOT_LOGGED_ON
 
1246
 Caller to continue with work in progress.
 ERROR_CONTINUE
 
1247
 An attempt was made to perform an initialization operation when initialization has already been completed.
 ERROR_ALREADY_INITIALIZED
 
1248
 No more local devices.
 ERROR_NO_MORE_DEVICES
 
1300
 Not all privileges referenced are assigned to the caller.
 ERROR_NOT_ALL_ASSIGNED
 
1301
 Some mapping between account names and security IDs was not done.
 ERROR_SOME_NOT_MAPPED
 
1302
 No system quota limits are specifically set for this account.
 ERROR_NO_QUOTAS_FOR_ACCOUNT
 
1303
 No encryption key is available. A well-known encryption key was returned.
 ERROR_LOCAL_USER_SESSION_KEY
 
1304
 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
 ERROR_NULL_LM_PASSWORD
 
1305
 The revision level is unknown.
 ERROR_UNKNOWN_REVISION
 
1306
 Indicates two revision levels are incompatible.
 ERROR_REVISION_MISMATCH
 
1307
 This security ID may not be assigned as the owner of this object.
 ERROR_INVALID_OWNER
 
1308
 This security ID may not be assigned as the primary group of an object.
 ERROR_INVALID_PRIMARY_GROUP
 
1309
 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
 ERROR_NO_IMPERSONATION_TOKEN
 
1310
 The group may not be disabled.
 ERROR_CANT_DISABLE_MANDATORY
 
1311
 There are currently no logon servers available to service the logon request.
 ERROR_NO_LOGON_SERVERS
 
1312
 A specified logon session does not exist. It may already have been terminated.
 ERROR_NO_SUCH_LOGON_SESSION
 
1313
 A specified privilege does not exist.
 ERROR_NO_SUCH_PRIVILEGE
 
1314
 A required privilege is not held by the client.
 ERROR_PRIVILEGE_NOT_HELD
 
1315
 The name provided is not a properly formed account name.
 ERROR_INVALID_ACCOUNT_NAME
 
1316
 The specified user already exists.
 ERROR_USER_EXISTS
 
1317
 The specified user does not exist.
 ERROR_NO_SUCH_USER
 
1318
 The specified group already exists.
 ERROR_GROUP_EXISTS
 
1319
 The specified group does not exist.
 ERROR_NO_SUCH_GROUP
 
1320
 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
 ERROR_MEMBER_IN_GROUP
 
1321
 The specified user account is not a member of the specified group account.
 ERROR_MEMBER_NOT_IN_GROUP
 
1322
 The last remaining administration account cannot be disabled or deleted.
 ERROR_LAST_ADMIN
 
1323
 Unable to update the password. The value provided as the current password is incorrect.
 ERROR_WRONG_PASSWORD
 
1324
 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
 ERROR_ILL_FORMED_PASSWORD
 
1325
 Unable to update the password because a password update rule has been violated.
 ERROR_PASSWORD_RESTRICTION
 
1326
 Logon failure: unknown user name or bad password.
 ERROR_LOGON_FAILURE
 
1327
 Logon failure: user account restriction.
 ERROR_ACCOUNT_RESTRICTION
 
1328
 Logon failure: account logon time restriction violation.
 ERROR_INVALID_LOGON_HOURS
 
1329
 Logon failure: user not allowed to log on to this computer.
 ERROR_INVALID_WORKSTATION
 
1330
 Logon failure: the specified account password has expired.
 ERROR_PASSWORD_EXPIRED
 
1331
 Logon failure: account currently disabled.
 ERROR_ACCOUNT_DISABLED
 
1332
 No mapping between account names and security IDs was done.
 ERROR_NONE_MAPPED
 
1333
 Too many local user identifiers (LUIDs) were requested at one time.
 ERROR_TOO_MANY_LUIDS_REQUESTED
 
1334
 No more local user identifiers (LUIDs) are available.
 ERROR_LUIDS_EXHAUSTED
 
1335
 The subauthority part of a security ID is invalid for this particular use.
 ERROR_INVALID_SUB_AUTHORITY
 
1336
 The access control list (ACL) structure is invalid.
 ERROR_INVALID_ACL
 
1337
 The security ID structure is invalid.
 ERROR_INVALID_SID
 
1338
 The security descriptor structure is invalid.
 ERROR_INVALID_SECURITY_DESCR
 
1340
 The inherited access control list (ACL) or access control entry (ACE) could not be built.
 ERROR_BAD_INHERITANCE_ACL
 
1341
 The server is currently disabled.
 ERROR_SERVER_DISABLED
 
1342
 The server is currently enabled.
 ERROR_SERVER_NOT_DISABLED
 
1343
 The value provided was an invalid value for an identifier authority.
 ERROR_INVALID_ID_AUTHORITY
 
1344
 No more memory is available for security information updates.
 ERROR_ALLOTTED_SPACE_EXCEEDED
 
1345
 The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
 ERROR_INVALID_GROUP_ATTRIBUTES
 
1346
 Either a required impersonation level was not provided, or the provided impersonation level is invalid.
 ERROR_BAD_IMPERSONATION_LEVEL
 
1347
 Cannot open an anonymous level security token.
 ERROR_CANT_OPEN_ANONYMOUS
 
1348
 The validation information class requested was invalid.
 ERROR_BAD_VALIDATION_CLASS
 
1349
 The type of the token is inappropriate for its attempted use.
 ERROR_BAD_TOKEN_TYPE
 
1350
 Unable to perform a security operation on an object that has no associated security.
 ERROR_NO_SECURITY_ON_OBJECT
 
1351
 Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.
 ERROR_CANT_ACCESS_DOMAIN_INFO
 
1352
 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
 ERROR_INVALID_SERVER_STATE
 
1353
 The domain was in the wrong state to perform the security operation.
 ERROR_INVALID_DOMAIN_STATE
 
1354
 This operation is only allowed for the Primary Domain Controller of the domain.
 ERROR_INVALID_DOMAIN_ROLE
 
1355
 The specified domain did not exist.
 ERROR_NO_SUCH_DOMAIN
 
1356
 The specified domain already exists.
 ERROR_DOMAIN_EXISTS
 
1357
 An attempt was made to exceed the limit on the number of domains per server.
 ERROR_DOMAIN_LIMIT_EXCEEDED
 
1358
 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
 ERROR_INTERNAL_DB_CORRUPTION
 
1359
 The security account database contains an internal inconsistency.
 ERROR_INTERNAL_ERROR
 
1360
 Generic access types were contained in an access mask which should already be mapped to nongeneric types.
 ERROR_GENERIC_NOT_MAPPED
 
1361
 A security descriptor is not in the right format (absolute or self-relative).
 ERROR_BAD_DESCRIPTOR_FORMAT
 
1362
 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
 ERROR_NOT_LOGON_PROCESS
 
1363
 Cannot start a new logon session with an ID that is already in use.
 ERROR_LOGON_SESSION_EXISTS
 
1364
 A specified authentication package is unknown.
 ERROR_NO_SUCH_PACKAGE
 
1365
 The logon session is not in a state that is consistent with the requested operation.
 ERROR_BAD_LOGON_SESSION_STATE
 
1366
 The logon session ID is already in use.
 ERROR_LOGON_SESSION_COLLISION
 
1367
 A logon request contained an invalid logon type value.
 ERROR_INVALID_LOGON_TYPE
 
1368
 Unable to impersonate using a named pipe until data has been read from that pipe.
 ERROR_CANNOT_IMPERSONATE
 
1369
 The transaction state of a registry subtree is incompatible with the requested operation.
 ERROR_RXACT_INVALID_STATE
 
1370
 An internal security database corruption has been encountered.
 ERROR_RXACT_COMMIT_FAILURE
 
1371
 Cannot perform this operation on built-in accounts.
 ERROR_SPECIAL_ACCOUNT
 
1372
 Cannot perform this operation on this built-in special group.
 ERROR_SPECIAL_GROUP
 
1373
 Cannot perform this operation on this built-in special user.
 ERROR_SPECIAL_USER
 
1374
 The user cannot be removed from a group because the group is currently the user's primary group.
 ERROR_MEMBERS_PRIMARY_GROUP
 
1375
 The token is already in use as a primary token.
 ERROR_TOKEN_ALREADY_IN_USE
 
1376
 The specified local group does not exist.
 ERROR_NO_SUCH_ALIAS
 
1377
 The specified account name is not a member of the local group.
 ERROR_MEMBER_NOT_IN_ALIAS
 
1378
 The specified account name is already a member of the local group.
 ERROR_MEMBER_IN_ALIAS
 
1379
 The specified local group already exists.
 ERROR_ALIAS_EXISTS
 
1380
 Logon failure: the user has not been granted the requested logon type at this computer.
 ERROR_LOGON_NOT_GRANTED
 
1381
 The maximum number of secrets that may be stored in a single system has been exceeded.
 ERROR_TOO_MANY_SECRETS
 
1382
 The length of a secret exceeds the maximum length allowed.
 ERROR_SECRET_TOO_LONG
 
1383
 The local security authority database contains an internal inconsistency.
 ERROR_INTERNAL_DB_ERROR
 
1384
 During a logon attempt, the user's security context accumulated too many security IDs.
 ERROR_TOO_MANY_CONTEXT_IDS
 
1385
 Logon failure: the user has not been granted the requested logon type at this computer.
 ERROR_LOGON_TYPE_NOT_GRANTED
 
1386
 A cross-encrypted password is necessary to change a user password.
 ERROR_NT_CROSS_ENCRYPTION_REQUIRED
 
1387
 A new member could not be added to a local group because the member does not exist.
 ERROR_NO_SUCH_MEMBER
 
1388
 A new member could not be added to a local group because the member has the wrong account type.
 ERROR_INVALID_MEMBER
 
1389
 Too many security IDs have been specified.
 ERROR_TOO_MANY_SIDS
 
1390
 A cross-encrypted password is necessary to change this user password.
 ERROR_LM_CROSS_ENCRYPTION_REQUIRED
 
1391
 Indicates an ACL contains no inheritable components.
 ERROR_NO_INHERITANCE
 
1392
 The file or directory is corrupted and non-readable.
 ERROR_FILE_CORRUPT
 
1393
 The disk structure is corrupted and non-readable.
 ERROR_DISK_CORRUPT
 
1394
 There is no user session key for the specified logon session.
 ERROR_NO_USER_SESSION_KEY
 
1395
 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
 ERROR_LICENSE_QUOTA_EXCEEDED
 
1400
 Invalid window handle.
 ERROR_INVALID_WINDOW_HANDLE
 
1401
 Invalid menu handle.
 ERROR_INVALID_MENU_HANDLE
 
1402
 Invalid cursor handle.
 ERROR_INVALID_CURSOR_HANDLE
 
1403
 Invalid accelerator table handle.
 ERROR_INVALID_ACCEL_HANDLE
 
1404
 Invalid hook handle.
 ERROR_INVALID_HOOK_HANDLE
 
1405
 Invalid handle to a multiple-window position structure.
 ERROR_INVALID_DWP_HANDLE
 
1406
 Cannot create a top-level child window.
 ERROR_TLW_WITH_WSCHILD
 
1407
 Cannot find window class.
 ERROR_CANNOT_FIND_WND_CLASS
 
1408
 Invalid window, it belongs to another thread.
 ERROR_WINDOW_OF_OTHER_THREAD
 
1409
 Hot key is already registered.
 ERROR_HOTKEY_ALREADY_REGISTERED
 
1410
 Class already exists.
 ERROR_CLASS_ALREADY_EXISTS
 
1411
 Class does not exist.
 ERROR_CLASS_DOES_NOT_EXIST
 
1412
 Class still has open windows.
 ERROR_CLASS_HAS_WINDOWS
 
1413
 Invalid index.
 ERROR_INVALID_INDEX
 
1414
 Invalid icon handle.
 ERROR_INVALID_ICON_HANDLE
 
1415
 Using private DIALOG window words.
 ERROR_PRIVATE_DIALOG_INDEX
 
1416
 The list box identifier was not found.
 ERROR_LISTBOX_ID_NOT_FOUND
 
1417
 No wildcards were found.
 ERROR_NO_WILDCARD_CHARACTERS
 
1418
 Thread does not have a clipboard open.
 ERROR_CLIPBOARD_NOT_OPEN
 
1419
 Hot key is not registered.
 ERROR_HOTKEY_NOT_REGISTERED
 
1420
 The window is not a valid dialog window.
 ERROR_WINDOW_NOT_DIALOG
 
1421
 Control ID not found.
 ERROR_CONTROL_ID_NOT_FOUND
 
1422
 Invalid message for a combo box because it does not have an edit control.
 ERROR_INVALID_COMBOBOX_MESSAGE
 
1423
 The window is not a combo box.
 ERROR_WINDOW_NOT_COMBOBOX
 
1424
 Height must be less than 256.
 ERROR_INVALID_EDIT_HEIGHT
 
1425
 Invalid device context (DC) handle.
 ERROR_DC_NOT_FOUND
 
1426
 Invalid hook procedure type.
 ERROR_INVALID_HOOK_FILTER
 
1427
 Invalid hook procedure.
 ERROR_INVALID_FILTER_PROC
 
1428
 Cannot set nonlocal hook without a module handle.
 ERROR_HOOK_NEEDS_HMOD
 
1429
 This hook procedure can only be set globally.
 ERROR_GLOBAL_ONLY_HOOK
 
1430
 The journal hook procedure is already installed.
 ERROR_JOURNAL_HOOK_SET
 
1431
 The hook procedure is not installed.
 ERROR_HOOK_NOT_INSTALLED
 
1432
 Invalid message for single-selection list box.
 ERROR_INVALID_LB_MESSAGE
 
1433
 LB_SETCOUNT sent to non-lazy list box.
 ERROR_SETCOUNT_ON_BAD_LB
 
1434
 This list box does not support tab stops.
 ERROR_LB_WITHOUT_TABSTOPS
 
1435
 Cannot destroy object created by another thread.
 ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
 
1436
 Child windows cannot have menus.
 ERROR_CHILD_WINDOW_MENU
 
1437
 The window does not have a system menu.
 ERROR_NO_SYSTEM_MENU
 
1438
 Invalid message box style.
 ERROR_INVALID_MSGBOX_STYLE
 
1439
 Invalid system-wide (SPI_*) parameter.
 ERROR_INVALID_SPI_VALUE
 
1440
 Screen already locked.
 ERROR_SCREEN_ALREADY_LOCKED
 
1441
 All handles to windows in a multiple-window position structure must have the same parent.
 ERROR_HWNDS_HAVE_DIFF_PARENT
 
1442
 The window is not a child window.
 ERROR_NOT_CHILD_WINDOW
 
1443
 Invalid GW_* command.
 ERROR_INVALID_GW_COMMAND
 
1444
 Invalid thread identifier.
 ERROR_INVALID_THREAD_ID
 
1445
 Cannot process a message from a window that is not a multiple document interface (MDI) window.
 ERROR_NON_MDICHILD_WINDOW
 
1446
 Popup menu already active.
 ERROR_POPUP_ALREADY_ACTIVE
 
1447
 The window does not have scroll bars.
 ERROR_NO_SCROLLBARS
 
1448
 Scroll bar range cannot be greater than 0x7FFF.
 ERROR_INVALID_SCROLLBAR_RANGE
 
1449
 Cannot show or remove the window in the way specified.
 ERROR_INVALID_SHOWWIN_COMMAND
 
1450
 Insufficient system resources exist to complete the requested service.
 ERROR_NO_SYSTEM_RESOURCES
 
1451
 Insufficient system resources exist to complete the requested service.
 ERROR_NONPAGED_SYSTEM_RESOURCES
 
1452
 Insufficient system resources exist to complete the requested service.
 ERROR_PAGED_SYSTEM_RESOURCES
 
1453
 Insufficient quota to complete the requested service.
 ERROR_WORKING_SET_QUOTA
 
1454
 Insufficient quota to complete the requested service.
 ERROR_PAGEFILE_QUOTA
 
1455
 The paging file is too small for this operation to complete.
 ERROR_COMMITMENT_LIMIT
 
1456
 A menu item was not found.
 ERROR_MENU_ITEM_NOT_FOUND
 
1457
 Invalid keyboard layout handle.
 ERROR_INVALID_KEYBOARD_HANDLE
 
1458
 Hook type not allowed.
 ERROR_HOOK_TYPE_NOT_ALLOWED
 
1459
 This operation requires an interactive window station.
 ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
 
1460
 This operation returned because the time-out period expired.
 ERROR_TIMEOUT
 
1500
 The event log file is corrupted.
 ERROR_EVENTLOG_FILE_CORRUPT
 
1501
 No event log file could be opened, so the event logging service did not start.
 ERROR_EVENTLOG_CANT_START
 
1502
 The event log file is full.
 ERROR_LOG_FILE_FULL
 
1503
 The event log file has changed between read operations.
 ERROR_EVENTLOG_FILE_CHANGED
 
1700
 The string binding is invalid.
 RPC_S_INVALID_STRING_BINDING
 
1701
 The binding handle is not the correct type.
 RPC_S_WRONG_KIND_OF_BINDING
 
1702
 The binding handle is invalid.
 RPC_S_INVALID_BINDING
 
1703
 The RPC protocol sequence is not supported.
 RPC_S_PROTSEQ_NOT_SUPPORTED
 
1704
 The RPC protocol sequence is invalid.
 RPC_S_INVALID_RPC_PROTSEQ
 
1705
 The string universal unique identifier (UUID) is invalid.
 RPC_S_INVALID_STRING_UUID
 
1706
 The endpoint format is invalid.
 RPC_S_INVALID_ENDPOINT_FORMAT
 
1707
 The network address is invalid.
 RPC_S_INVALID_NET_ADDR
 
1708
 No endpoint was found.
 RPC_S_NO_ENDPOINT_FOUND
 
1709
 The time-out value is invalid.
 RPC_S_INVALID_TIMEOUT
 
1710
 The object universal unique identifier (UUID) was not found.
 RPC_S_OBJECT_NOT_FOUND
 
1711
 The object universal unique identifier (UUID) has already been registered.
 RPC_S_ALREADY_REGISTERED
 
1712
 The type universal unique identifier (UUID) has already been registered.
 RPC_S_TYPE_ALREADY_REGISTERED
 
1713
 The RPC server is already listening.
 RPC_S_ALREADY_LISTENING
 
1714
 No protocol sequences have been registered.
 RPC_S_NO_PROTSEQS_REGISTERED
 
1715
 The RPC server is not listening.
 RPC_S_NOT_LISTENING
 
1716
 The manager type is unknown.
 RPC_S_UNKNOWN_MGR_TYPE
 
1717
 The interface is unknown.
 RPC_S_UNKNOWN_IF
 
1718
 There are no bindings.
 RPC_S_NO_BINDINGS
 
1719
 There are no protocol sequences.
 RPC_S_NO_PROTSEQS
 
1720
 The endpoint cannot be created.
 RPC_S_CANT_CREATE_ENDPOINT
 
1721
 Not enough resources are available to complete this operation.
 RPC_S_OUT_OF_RESOURCES
 
1722
 The RPC server is unavailable.
 RPC_S_SERVER_UNAVAILABLE
 
1723
 The RPC server is too busy to complete this operation.
 RPC_S_SERVER_TOO_BUSY
 
1724
 The network options are invalid.
 RPC_S_INVALID_NETWORK_OPTIONS
 
1725
 There is not a remote procedure call active in this thread.
 RPC_S_NO_CALL_ACTIVE
 
1726
 The remote procedure call failed.
 RPC_S_CALL_FAILED
 
1727
 The remote procedure call failed and did not execute.
 RPC_S_CALL_FAILED_DNE
 
1728
 A remote procedure call (RPC) protocol error occurred.
 RPC_S_PROTOCOL_ERROR
 
1730
 The transfer syntax is not supported by the RPC server.
 RPC_S_UNSUPPORTED_TRANS_SYN
 
1732
 The universal unique identifier (UUID) type is not supported.
 RPC_S_UNSUPPORTED_TYPE
 
1733
 The tag is invalid.
 RPC_S_INVALID_TAG
 
1734
 The array bounds are invalid.
 RPC_S_INVALID_BOUND
 
1735
 The binding does not contain an entry name.
 RPC_S_NO_ENTRY_NAME
 
1736
 The name syntax is invalid.
 RPC_S_INVALID_NAME_SYNTAX
 
1737
 The name syntax is not supported.
 RPC_S_UNSUPPORTED_NAME_SYNTAX
 
1739
 No network address is available to use to construct a universal unique identifier (UUID).
 RPC_S_UUID_NO_ADDRESS
 
1740
 The endpoint is a duplicate.
 RPC_S_DUPLICATE_ENDPOINT
 
1741
 The authentication type is unknown.
 RPC_S_UNKNOWN_AUTHN_TYPE
 
1742
 The maximum number of calls is too small.
 RPC_S_MAX_CALLS_TOO_SMALL
 
1743
 The string is too long.
 RPC_S_STRING_TOO_LONG
 
1744
 The RPC protocol sequence was not found.
 RPC_S_PROTSEQ_NOT_FOUND
 
1745
 The procedure number is out of range.
 RPC_S_PROCNUM_OUT_OF_RANGE
 
1746
 The binding does not contain any authentication information.
 RPC_S_BINDING_HAS_NO_AUTH
 
1747
 The authentication service is unknown.
 RPC_S_UNKNOWN_AUTHN_SERVICE
 
1748
 The authentication level is unknown.
 RPC_S_UNKNOWN_AUTHN_LEVEL
 
1749
 The security context is invalid.
 RPC_S_INVALID_AUTH_IDENTITY
 
1750
 The authorization service is unknown.
 RPC_S_UNKNOWN_AUTHZ_SERVICE
 
1751
 The entry is invalid.
 EPT_S_INVALID_ENTRY
 
1752
 The server endpoint cannot perform the operation.
 EPT_S_CANT_PERFORM_OP
 
1753
 There are no more endpoints available from the endpoint mapper.
 EPT_S_NOT_REGISTERED
 
1754
 No interfaces have been exported.
 RPC_S_NOTHING_TO_EXPORT
 
1755
 The entry name is incomplete.
 RPC_S_INCOMPLETE_NAME
 
1756
 The version option is invalid.
 RPC_S_INVALID_VERS_OPTION
 
1757
 There are no more members.
 RPC_S_NO_MORE_MEMBERS
 
1758
 There is nothing to unexport.
 RPC_S_NOT_ALL_OBJS_UNEXPORTED
 
1759
 The interface was not found.
 RPC_S_INTERFACE_NOT_FOUND
 
1760
 The entry already exists.
 RPC_S_ENTRY_ALREADY_EXISTS
 
1761
 The entry is not found.
 RPC_S_ENTRY_NOT_FOUND
 
1762
 The name service is unavailable.
 RPC_S_NAME_SERVICE_UNAVAILABLE
 
1763
 The network address family is invalid.
 RPC_S_INVALID_NAF_ID
 
1764
 The requested operation is not supported.
 RPC_S_CANNOT_SUPPORT
 
1765
 No security context is available to allow impersonation.
 RPC_S_NO_CONTEXT_AVAILABLE
 
1766
 An internal error occurred in a remote procedure call (RPC).
 RPC_S_INTERNAL_ERROR
 
1767
 The RPC server attempted an integer division by zero.
 RPC_S_ZERO_DIVIDE
 
1768
 An addressing error occurred in the RPC server.
 RPC_S_ADDRESS_ERROR
 
1769
 A floating-point operation at the RPC server caused a division by zero.
 RPC_S_FP_DIV_ZERO
 
1770
 A floating-point underflow occurred at the RPC server.
 RPC_S_FP_UNDERFLOW
 
1771
 A floating-point overflow occurred at the RPC server.
 RPC_S_FP_OVERFLOW
 
1772
 The list of RPC servers available for the binding of auto handles has been exhausted.
 RPC_X_NO_MORE_ENTRIES
 
1773
 Unable to open the character translation table file.
 RPC_X_SS_CHAR_TRANS_OPEN_FAIL
 
1774
 The file containing the character translation table has fewer than 512 bytes.
 RPC_X_SS_CHAR_TRANS_SHORT_FILE
 
1775
 A null context handle was passed from the client to the host during a remote procedure call.
 RPC_X_SS_IN_NULL_CONTEXT
 
1777
 The context handle changed during a remote procedure call.
 RPC_X_SS_CONTEXT_DAMAGED
 
1778
 The binding handles passed to a remote procedure call do not match.
 RPC_X_SS_HANDLES_MISMATCH
 
1779
 The stub is unable to get the remote procedure call handle.
 RPC_X_SS_CANNOT_GET_CALL_HANDLE
 
1780
 A null reference pointer was passed to the stub.
 RPC_X_NULL_REF_POINTER
 
1781
 The enumeration value is out of range.
 RPC_X_ENUM_VALUE_OUT_OF_RANGE
 
1782
 The byte count is too small.
 RPC_X_BYTE_COUNT_TOO_SMALL
 
1783
 The stub received bad data.
 RPC_X_BAD_STUB_DATA
 
1784
 The supplied user buffer is not valid for the requested operation.
 ERROR_INVALID_USER_BUFFER
 
1785
 The disk media is not recognized. It may not be formatted.
 ERROR_UNRECOGNIZED_MEDIA
 
1786
 The workstation does not have a trust secret.
 ERROR_NO_TRUST_LSA_SECRET
 
1787
 The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.
 ERROR_NO_TRUST_SAM_ACCOUNT
 
1788
 The trust relationship between the primary domain and the trusted domain failed.
 ERROR_TRUSTED_DOMAIN_FAILURE
 
1789
 The trust relationship between this workstation and the primary domain failed.
 ERROR_TRUSTED_RELATIONSHIP_FAILURE
 
1790
 The network logon failed.
 ERROR_TRUST_FAILURE
 
1791
 A remote procedure call is already in progress for this thread.
 RPC_S_CALL_IN_PROGRESS
 
1792
 An attempt was made to logon, but the network logon service was not started.
 ERROR_NETLOGON_NOT_STARTED
 
1793
 The user's account has expired.
 ERROR_ACCOUNT_EXPIRED
 
1794
 The redirector is in use and cannot be unloaded.
 ERROR_REDIRECTOR_HAS_OPEN_HANDLES
 
1795
 The specified printer driver is already installed.
 ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
 
1796
 The specified port is unknown.
 ERROR_UNKNOWN_PORT
 
1797
 The printer driver is unknown.
 ERROR_UNKNOWN_PRINTER_DRIVER
 
1798
 The print processor is unknown.
 ERROR_UNKNOWN_PRINTPROCESSOR
 
1799
 The specified separator file is invalid.
 ERROR_INVALID_SEPARATOR_FILE
 
1800
 The specified priority is invalid.
 ERROR_INVALID_PRIORITY
 
1801
 The printer name is invalid.
 ERROR_INVALID_PRINTER_NAME
 
1802
 The printer already exists.
 ERROR_PRINTER_ALREADY_EXISTS
 
1803
 The printer command is invalid.
 ERROR_INVALID_PRINTER_COMMAND
 
1804
 The specified data type is invalid.
 ERROR_INVALID_DATATYPE
 
1805
 The environment specified is invalid.
 ERROR_INVALID_ENVIRONMENT
 
1806
 There are no more bindings.
 RPC_S_NO_MORE_BINDINGS
 
1807
 The account used is an interdomain trust account. Use your global user account or local user account to access this server.
 ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
 
1808
 The account used is a computer account. Use your global user account or local user account to access this server.
 ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
 
1809
 The account used is a server trust account. Use your global user account or local user account to access this server.
 ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
 
1810
 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
 ERROR_DOMAIN_TRUST_INCONSISTENT
 
1811
 The server is in use and cannot be unloaded.
 ERROR_SERVER_HAS_OPEN_HANDLES
 
1812
 The specified image file did not contain a resource section.
 ERROR_RESOURCE_DATA_NOT_FOUND
 
1813
 The specified resource type cannot be found in the image file.
 ERROR_RESOURCE_TYPE_NOT_FOUND
 
1814
 The specified resource name cannot be found in the image file.
 ERROR_RESOURCE_NAME_NOT_FOUND
 
1815
 The specified resource language ID cannot be found in the image file.
 ERROR_RESOURCE_LANG_NOT_FOUND
 
1816
 Not enough quota is available to process this command.
 ERROR_NOT_ENOUGH_QUOTA
 
1817
 No interfaces have been registered.
 RPC_S_NO_INTERFACES
 
1818
 The server was altered while processing this call.
 RPC_S_CALL_CANCELLED
 
1819
 The binding handle does not contain all required information.
 RPC_S_BINDING_INCOMPLETE
 
1820
 Communications failure.
 RPC_S_COMM_FAILURE
 
1821
 The requested authentication level is not supported.
 RPC_S_UNSUPPORTED_AUTHN_LEVEL
 
1822
 No principal name registered.
 RPC_S_NO_PRINC_NAME
 
1823
 The error specified is not a valid Windows NT RPC error code.
 RPC_S_NOT_RPC_ERROR
 
1824
 A UUID that is valid only on this computer has been allocated.
 RPC_S_UUID_LOCAL_ONLY
 
1825
 A security package specific error occurred.
 RPC_S_SEC_PKG_ERROR
 
1826
 Thread is not canceled.
 RPC_S_NOT_CANCELLED
 
1827
 Invalid operation on the encoding/decoding handle.
 RPC_X_INVALID_ES_ACTION
 
1828
 Incompatible version of the serializing package.
 RPC_X_WRONG_ES_VERSION
 
1829
 Incompatible version of the RPC stub.
 RPC_X_WRONG_STUB_VERSION
 
1830
 The idl pipe object is invalid or corrupted.
 RPC_X_INVALID_PIPE_OBJECT
 
1831
 The operation is invalid for a given idl pipe object.
 RPC_X_INVALID_PIPE_OPERATION
 
1832
 The idl pipe version is not supported.
 RPC_X_WRONG_PIPE_VERSION
 
1898
 The group member was not found.
 RPC_S_GROUP_MEMBER_NOT_FOUND
 
1899
 The endpoint mapper database could not be created.
 EPT_S_CANT_CREATE
 
1900
 The object universal unique identifier (UUID) is the nil UUID.
 RPC_S_INVALID_OBJECT
 
1901
 The specified time is invalid.
 ERROR_INVALID_TIME
 
1902
 The specified form name is invalid.
 ERROR_INVALID_FORM_NAME
 
1903
 The specified form size is invalid.
 ERROR_INVALID_FORM_SIZE
 
1904
 The specified printer handle is already being waited on
 ERROR_ALREADY_WAITING
 
1905
 The specified printer has been deleted.
 ERROR_PRINTER_DELETED
 
1906
 The state of the printer is invalid.
 ERROR_INVALID_PRINTER_STATE
 
1907
 The user must change his password before he logs on the first time.
 ERROR_PASSWORD_MUST_CHANGE
 
1908
 Could not find the domain controller for this domain.
 ERROR_DOMAIN_CONTROLLER_NOT_FOUND
 
1909
 The referenced account is currently locked out and may not be logged on to.
 ERROR_ACCOUNT_LOCKED_OUT
 
1910
 The object exporter specified was not found.
 OR_INVALID_OXID
 
1911
 The object specified was not found.
 OR_INVALID_OID
 
1912
 The object resolver set specified was not found.
 OR_INVALID_SET
 
1913
 Some data remains to be sent in the request buffer.
 RPC_S_SEND_INCOMPLETE
 
2000
 The pixel format is invalid.
 ERROR_INVALID_PIXEL_FORMAT
 
2001
 The specified driver is invalid.
 ERROR_BAD_DRIVER
 
2002
 The window style or class attribute is invalid for this operation.
 ERROR_INVALID_WINDOW_STYLE
 
2003
 The requested metafile operation is not supported.
 ERROR_METAFILE_NOT_SUPPORTED
 
2004
 The requested transformation operation is not supported.
 ERROR_TRANSFORM_NOT_SUPPORTED
 
2005
 The requested clipping operation is not supported.
 ERROR_CLIPPING_NOT_SUPPORTED
 
2202
 The specified user name is invalid.
 ERROR_BAD_USERNAME
 
2250
 This network connection does not exist.
 ERROR_NOT_CONNECTED
 
2401
 This network connection has files open or requests pending.
 ERROR_OPEN_FILES
 
2402
 Active connections still exist.
 ERROR_ACTIVE_CONNECTIONS
 
2404
 The device is in use by an active process and cannot be disconnected.
 ERROR_DEVICE_IN_USE
 
3000
 The specified print monitor is unknown.
 ERROR_UNKNOWN_PRINT_MONITOR
 
3001
 The specified printer driver is currently in use.
 ERROR_PRINTER_DRIVER_IN_USE
 
3002
 The spool file was not found.
 ERROR_SPOOL_FILE_NOT_FOUND
 
3003
 A StartDocPrinter call was not issued.
 ERROR_SPL_NO_STARTDOC
 
3004
 An AddJob call was not issued.
 ERROR_SPL_NO_ADDJOB
 
3005
 The specified print processor has already been installed.
 ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
 
3006
 The specified print monitor has already been installed.
 ERROR_PRINT_MONITOR_ALREADY_INSTALLED
 
3007
 The specified print monitor does not have the required functions.
 ERROR_INVALID_PRINT_MONITOR
 
3008
 The specified print monitor is currently in use.
 ERROR_PRINT_MONITOR_IN_USE
 
3009
 The requested operation is not allowed when there are jobs queued to the printer.
 ERROR_PRINTER_HAS_JOBS_QUEUED
 
3010
 The requested operation is successful. Changes will not be effective until the system is rebooted.
 ERROR_SUCCESS_REBOOT_REQUIRED
 
3011
 The requested operation is successful. Changes will not be effective until the service is restarted.
 ERROR_SUCCESS_RESTART_REQUIRED
 
4000
 WINS encountered an error while processing the command.
 ERROR_WINS_INTERNAL
 
4001
 The local WINS can not be deleted.
 ERROR_CAN_NOT_DEL_LOCAL_WINS
 
4002
 The importation from the file failed.
 ERROR_STATIC_INIT
 
4003
 The backup failed. Was a full backup done before?
 ERROR_INC_BACKUP
 
4004
 The backup failed. Check the directory to which you are backing the database.
 ERROR_FULL_BACKUP
 
4005
 The name does not exist in the WINS database.
 ERROR_REC_NON_EXISTENT
 
4006
 Replication with a nonconfigured partner is not allowed.
 ERROR_RPL_NOT_ALLOWED
 
6118
 The list of servers for this workgroup is not currently available
 ERROR_NO_BROWSER_SERVERS_FOUND
 
10053
 Connection aborted. (An established connection was aborted by the software in your host machine.)
 WSAECONNABORTED
 
10054
 Connection reset by peer. (An existing connection was forcibly closed by the remote host)
 WSAECONNRESET
victorhugomuniz
Moderador
Moderador
Mensagens: 1396
Registrado em: Sex, 01 Fev 2008 2:06 pm
Localização: Rio de Janeiro - RJ
Contato:
:D

grato pela contribuição
Avatar do usuário
lincolnrn
Rank: Estagiário Sênior
Rank: Estagiário Sênior
Mensagens: 13
Registrado em: Ter, 05 Jan 2010 9:41 am
Localização: Contagem-MG
Contato:
Lincoln Rocha Nogueira
www.tecconect.com

Me da uma Luz como resolver o 1019 to apanhando aqui...
diegolenhardt
Moderador
Moderador
Mensagens: 1177
Registrado em: Qui, 15 Out 2009 10:28 am
Localização: Recife

não é espaço em disco?
Responder
  • Informação
  • Quem está online

    Usuários navegando neste fórum: Nenhum usuário registrado e 7 visitantes