Code
Description
Name
0
The operation completed successfully.
ERROR_SUCCESS
1
Incorrect function.
ERROR_INVALID_FUNCTION
2
The system cannot find the file specified.
ERROR_FILE_NOT_FOUND
3
The system cannot find the path specified.
ERROR_PATH_NOT_FOUND
4
The system cannot open the file.
ERROR_TOO_MANY_OPEN_FILES
5
Access is denied.
ERROR_ACCESS_DENIED
6
The handle is invalid.
ERROR_INVALID_HANDLE
7
The storage control blocks were destroyed.
ERROR_ARENA_TRASHED
8
Not enough storage is available to process this command.
ERROR_NOT_ENOUGH_MEMORY
9
The storage control block address is invalid.
ERROR_INVALID_BLOCK
10
The environment is incorrect.
ERROR_BAD_ENVIRONMENT
11
An attempt was made to load a program with an incorrect format.
ERROR_BAD_FORMAT
12
The access code is invalid.
ERROR_INVALID_ACCESS
13
The data is invalid.
ERROR_INVALID_DATA
14
Not enough storage is available to complete this operation.
ERROR_OUTOFMEMORY
15
The system cannot find the drive specified.
ERROR_INVALID_DRIVE
16
The directory cannot be removed.
ERROR_CURRENT_DIRECTORY
17
The system cannot move the file to a different disk drive.
ERROR_NOT_SAME_DEVICE
18
There are no more files.
ERROR_NO_MORE_FILES
19
The media is write protected.
ERROR_WRITE_PROTECT
20
The system cannot find the device specified.
ERROR_BAD_UNIT
21
The device is not ready.
ERROR_NOT_READY
22
The device does not recognize the command.
ERROR_BAD_COMMAND
23
Data error (cyclic redundancy check).
ERROR_CRC
24
The program issued a command but the command length is incorrect.
ERROR_BAD_LENGTH
25
The drive cannot locate a specific area or track on the disk.
ERROR_SEEK
26
The specified disk or diskette cannot be accessed.
ERROR_NOT_DOS_DISK
27
The drive cannot find the sector requested.
ERROR_SECTOR_NOT_FOUND
28
The printer is out of paper.
ERROR_OUT_OF_PAPER
29
The system cannot write to the specified device.
ERROR_WRITE_FAULT
30
The system cannot read from the specified device.
ERROR_READ_FAULT
31
A device attached to the system is not functioning.
ERROR_GEN_FAILURE
32
The process cannot access the file because it is being used by another process.
ERROR_SHARING_VIOLATION
33
The process cannot access the file because another process has locked a portion of the file.
ERROR_LOCK_VIOLATION
34
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
ERROR_WRONG_DISK
36
Too many files opened for sharing.
ERROR_SHARING_BUFFER_EXCEEDED
38
Reached the end of the file.
ERROR_HANDLE_EOF
39
The disk is full.
ERROR_HANDLE_DISK_FULL
50
The network request is not supported.
ERROR_NOT_SUPPORTED
51
The remote computer is not available.
ERROR_REM_NOT_LIST
52
A duplicate name exists on the network.
ERROR_DUP_NAME
53
The network path was not found.
ERROR_BAD_NETPATH
54
The network is busy.
ERROR_NETWORK_BUSY
55
The specified network resource or device is no longer available.
ERROR_DEV_NOT_EXIST
56
The network BIOS command limit has been reached.
ERROR_TOO_MANY_CMDS
57
A network adapter hardware error occurred.
ERROR_ADAP_HDW_ERR
58
The specified server cannot perform the requested operation.
ERROR_BAD_NET_RESP
59
An unexpected network error occurred.
ERROR_UNEXP_NET_ERR
60
The remote adapter is not compatible.
ERROR_BAD_REM_ADAP
61
The printer queue is full.
ERROR_PRINTQ_FULL
62
Space to store the file waiting to be printed is not available on the server.
ERROR_NO_SPOOL_SPACE
63
Your file waiting to be printed was deleted.
ERROR_PRINT_CANCELLED
64
The specified network name is no longer available.
ERROR_NETNAME_DELETED
65
Network access is denied.
ERROR_NETWORK_ACCESS_DENIED
66
The network resource type is not correct.
ERROR_BAD_DEV_TYPE
67
The network name cannot be found.
ERROR_BAD_NET_NAME
68
The name limit for the local computer network adapter card was exceeded.
ERROR_TOO_MANY_NAMES
69
The network BIOS session limit was exceeded.
ERROR_TOO_MANY_SESS
70
The remote server has been paused or is in the process of being started.
ERROR_SHARING_PAUSED
71
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
ERROR_REQ_NOT_ACCEP
72
The specified printer or disk device has been paused.
ERROR_REDIR_PAUSED
80
The file exists.
ERROR_FILE_EXISTS
82
The directory or file cannot be created.
ERROR_CANNOT_MAKE
83
Fail on INT 24.
ERROR_FAIL_I24
84
Storage to process this request is not available.
ERROR_OUT_OF_STRUCTURES
85
The local device name is already in use.
ERROR_ALREADY_ASSIGNED
86
The specified network password is not correct.
ERROR_INVALID_PASSWORD
87
The parameter is incorrect.
ERROR_INVALID_PARAMETER
88
A write fault occurred on the network.
ERROR_NET_WRITE_FAULT
89
The system cannot start another process at this time.
ERROR_NO_PROC_SLOTS
100
Cannot create another system semaphore.
ERROR_TOO_MANY_SEMAPHORES
101
The exclusive semaphore is owned by another process.
ERROR_EXCL_SEM_ALREADY_OWNED
102
The semaphore is set and cannot be closed.
ERROR_SEM_IS_SET
103
The semaphore cannot be set again.
ERROR_TOO_MANY_SEM_REQUESTS
104
Cannot request exclusive semaphores at interrupt time.
ERROR_INVALID_AT_INTERRUPT_TIME
105
The previous ownership of this semaphore has ended.
ERROR_SEM_OWNER_DIED
106
Insert the diskette for drive %1.
ERROR_SEM_USER_LIMIT
107
The program stopped because an alternate diskette was not inserted.
ERROR_DISK_CHANGE
108
The disk is in use or locked by another process.
ERROR_DRIVE_LOCKED
109
The pipe has been ended.
ERROR_BROKEN_PIPE
110
The system cannot open the device or file specified.
ERROR_OPEN_FAILED
111
The file name is too long.
ERROR_BUFFER_OVERFLOW
112
There is not enough space on the disk.
ERROR_DISK_FULL
113
No more internal file identifiers available.
ERROR_NO_MORE_SEARCH_HANDLES
114
The target internal file identifier is incorrect.
ERROR_INVALID_TARGET_HANDLE
117
The IOCTL call made by the application program is not correct.
ERROR_INVALID_CATEGORY
118
The verify-on-write switch parameter value is not correct.
ERROR_INVALID_VERIFY_SWITCH
119
The system does not support the command requested.
ERROR_BAD_DRIVER_LEVEL
120
This function is not valid on this platform.
ERROR_CALL_NOT_IMPLEMENTED
121
The semaphore time-out period has expired.
ERROR_SEM_TIMEOUT
122
The data area passed to a system call is too small.
ERROR_INSUFFICIENT_BUFFER
123
The filename, directory name, or volume label syntax is incorrect.
ERROR_INVALID_NAME
124
The system call level is not correct.
ERROR_INVALID_LEVEL
125
The disk has no volume label.
ERROR_NO_VOLUME_LABEL
126
The specified module could not be found.
ERROR_MOD_NOT_FOUND
127
The specified procedure could not be found.
ERROR_PROC_NOT_FOUND
128
There are no child processes to wait for.
ERROR_WAIT_NO_CHILDREN
129
The %1 application cannot be run in Windows NT mode.
ERROR_CHILD_NOT_COMPLETE
130
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
ERROR_DIRECT_ACCESS_HANDLE
131
An attempt was made to move the file pointer before the beginning of the file.
ERROR_NEGATIVE_SEEK
132
The file pointer cannot be set on the specified device or file.
ERROR_SEEK_ON_DEVICE
133
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
ERROR_IS_JOIN_TARGET
134
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
ERROR_IS_JOINED
135
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
ERROR_IS_SUBSTED
136
The system tried to delete the JOIN of a drive that is not joined.
ERROR_NOT_JOINED
137
The system tried to delete the substitution of a drive that is not substituted.
ERROR_NOT_SUBSTED
138
The system tried to join a drive to a directory on a joined drive.
ERROR_JOIN_TO_JOIN
139
The system tried to substitute a drive to a directory on a substituted drive.
ERROR_SUBST_TO_SUBST
140
The system tried to join a drive to a directory on a substituted drive.
ERROR_JOIN_TO_SUBST
141
The system tried to SUBST a drive to a directory on a joined drive.
ERROR_SUBST_TO_JOIN
142
The system cannot perform a JOIN or SUBST at this time.
ERROR_BUSY_DRIVE
143
The system cannot join or substitute a drive to or for a directory on the same drive.
ERROR_SAME_DRIVE
144
The directory is not a subdirectory of the root directory.
ERROR_DIR_NOT_ROOT
145
The directory is not empty.
ERROR_DIR_NOT_EMPTY
146
The path specified is being used in a substitute.
ERROR_IS_SUBST_PATH
147
Not enough resources are available to process this command.
ERROR_IS_JOIN_PATH
148
The path specified cannot be used at this time.
ERROR_PATH_BUSY
149
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
ERROR_IS_SUBST_TARGET
150
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
ERROR_SYSTEM_TRACE
151
The number of specified semaphore events for DosMuxSemWait is not correct.
ERROR_INVALID_EVENT_COUNT
152
DosMuxSemWait did not execute; too many semaphores are already set.
ERROR_TOO_MANY_MUXWAITERS
153
The DosMuxSemWait list is not correct.
ERROR_INVALID_LIST_FORMAT
154
The volume label you entered exceeds the label character limit of the target file system.
ERROR_LABEL_TOO_LONG
155
Cannot create another thread.
ERROR_TOO_MANY_TCBS
156
The recipient process has refused the signal.
ERROR_SIGNAL_REFUSED
157
The segment is already discarded and cannot be locked.
ERROR_DISCARDED
158
The segment is already unlocked.
ERROR_NOT_LOCKED
159
The address for the thread ID is not correct.
ERROR_BAD_THREADID_ADDR
160
The argument string passed to DosExecPgm is not correct.
ERROR_BAD_ARGUMENTS
161
The specified path is invalid.
ERROR_BAD_PATHNAME
162
A signal is already pending.
ERROR_SIGNAL_PENDING
164
No more threads can be created in the system.
ERROR_MAX_THRDS_REACHED
167
Unable to lock a region of a file.
ERROR_LOCK_FAILED
170
The requested resource is in use.
ERROR_BUSY
173
A lock request was not outstanding for the supplied cancel region.
ERROR_CANCEL_VIOLATION
174
The file system does not support atomic changes to the lock type.
ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
180
The system detected a segment number that was not correct.
ERROR_INVALID_SEGMENT_NUMBER
182
The operating system cannot run %1.
ERROR_INVALID_ORDINAL
183
Cannot create a file when that file already exists.
ERROR_ALREADY_EXISTS
186
The flag passed is not correct.
ERROR_INVALID_FLAG_NUMBER
187
The specified system semaphore name was not found.
ERROR_SEM_NOT_FOUND
188
The operating system cannot run %1.
ERROR_INVALID_STARTING_CODESEG
189
The operating system cannot run %1.
ERROR_INVALID_STACKSEG
190
The operating system cannot run %1.
ERROR_INVALID_MODULETYPE
191
Cannot run %1 in Windows NT mode.
ERROR_INVALID_EXE_SIGNATURE
192
The operating system cannot run %1.
ERROR_EXE_MARKED_INVALID
193
Is not a valid application.
ERROR_BAD_EXE_FORMAT
194
The operating system cannot run %1.
ERROR_ITERATED_DATA_EXCEEDS_64k
195
The operating system cannot run %1.
ERROR_INVALID_MINALLOCSIZE
196
The operating system cannot run this application program.
ERROR_DYNLINK_FROM_INVALID_RING
197
The operating system is not presently configured to run this application.
ERROR_IOPL_NOT_ENABLED
198
The operating system cannot run %1.
ERROR_INVALID_SEGDPL
199
The operating system cannot run this application program.
ERROR_AUTODATASEG_EXCEEDS_64k
200
The code segment cannot be greater than or equal to 64K.
ERROR_RING2SEG_MUST_BE_MOVABLE
201
The operating system cannot run %1.
ERROR_RELOC_CHAIN_XEEDS_SEGLIM
202
The operating system cannot run %1.
ERROR_INFLOOP_IN_RELOC_CHAIN
203
The system could not find the environment option that was entered.
ERROR_ENVVAR_NOT_FOUND
205
No process in the command subtree has a signal handler.
ERROR_NO_SIGNAL_SENT
206
The filename or extension is too long.
ERROR_FILENAME_EXCED_RANGE
207
The ring 2 stack is in use.
ERROR_RING2_STACK_IN_USE
208
The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
ERROR_META_EXPANSION_TOO_LONG
209
The signal being posted is not correct.
ERROR_INVALID_SIGNAL_NUMBER
210
The signal handler cannot be set.
ERROR_THREAD_1_INACTIVE
212
The segment is locked and cannot be reallocated.
ERROR_LOCKED
214
Too many dynamic-link modules are attached to this program or dynamic-link module.
ERROR_TOO_MANY_MODULES
215
Can't nest calls to LoadModule.
ERROR_NESTING_NOT_ALLOWED
216
The image file %1 is valid, but is for a machine type other than the current machine.
ERROR_EXE_MACHINE_TYPE_MISMATCH
230
The pipe state is invalid.
ERROR_BAD_PIPE
231
All pipe instances are busy.
ERROR_PIPE_BUSY
232
The pipe is being closed.
ERROR_NO_DATA
233
No process is on the other end of the pipe.
ERROR_PIPE_NOT_CONNECTED
234
More data is available.
ERROR_MORE_DATA
240
The session was canceled.
ERROR_você_DISCONNECTED
254
The specified extended attribute name was invalid.
ERROR_INVALID_EA_NAME
255
The extended attributes are inconsistent.
ERROR_EA_LIST_INCONSISTENT
259
No more data is available.
ERROR_NO_MORE_ITEMS
266
The copy functions cannot be used.
ERROR_CANNOT_COPY
267
The directory name is invalid.
ERROR_DIRECTORY
275
The extended attributes did not fit in the buffer.
ERROR_EAS_DIDNT_FIT
276
The extended attribute file on the mounted file system is corrupt.
ERROR_EA_FILE_CORRUPT
277
The extended attribute table file is full.
ERROR_EA_TABLE_FULL
278
The specified extended attribute handle is invalid.
ERROR_INVALID_EA_HANDLE
282
The mounted file system does not support extended attributes.
ERROR_EAS_NOT_SUPPORTED
288
Attempt to release mutex not owned by caller.
ERROR_NOT_OWNER
298
Too many posts were made to a semaphore.
ERROR_TOO_MANY_POSTS
299
Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
ERROR_PARTIAL_COPY
317
The system cannot find message text for message number 0x%1 in the message file for %2.
ERROR_MR_MID_NOT_FOUND
487
Attempt to access invalid address.
ERROR_INVALID_ADDRESS
534
Arithmetic result exceeded 32 bits.
ERROR_ARITHMETIC_OVERFLOW
535
There is a process on other end of the pipe.
ERROR_PIPE_CONNECTED
536
Waiting for a process to open the other end of the pipe.
ERROR_PIPE_LISTENING
994
Access to the extended attribute was denied.
ERROR_EA_ACCESS_DENIED
995
The I/O operation has been aborted because of either a thread exit or an application request.
ERROR_OPERATION_ABORTED
996
Overlapped I/O event is not in a signaled state.
ERROR_IO_INCOMPLETE
997
Overlapped I/O operation is in progress.
ERROR_IO_PENDING
998
Invalid access to memory location.
ERROR_NOACCESS
999
Error performing inpage operation.
ERROR_SWAPERROR
1001
Recursion too deep; the stack overflowed.
ERROR_STACK_OVERFLOW
1002
The window cannot act on the sent message.
ERROR_INVALID_MESSAGE
1003
Cannot complete this function.
ERROR_CAN_NOT_COMPLETE
1004
Invalid flags.
ERROR_INVALID_FLAGS
1005
The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
ERROR_UNRECOGNIZED_VOLUME
1006
The volume for a file has been externally altered so that the opened file is no longer valid.
ERROR_FILE_INVALID
1007
The requested operation cannot be performed in full-screen mode.
ERROR_FULLSCREEN_MODE
1008
An attempt was made to reference a token that does not exist.
ERROR_NO_TOKEN
1009
The configuration registry database is corrupt.
ERROR_BADDB
1010
The configuration registry key is invalid.
ERROR_BADKEY
1011
The configuration registry key could not be opened.
ERROR_CANTOPEN
1012
The configuration registry key could not be read.
ERROR_CANTREAD
1013
The configuration registry key could not be written.
ERROR_CANTWRITE
1014
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
ERROR_REGISTRY_RECOVERED
1015
The registry is corrupted. The structure of one of the files that contains registry data is corrupted, or the system's image of the file in memory is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
ERROR_REGISTRY_CORRUPT
1016
An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
ERROR_REGISTRY_IO_FAILED
1017
The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
ERROR_NOT_REGISTRY_FILE
1018
Illegal operation attempted on a registry key that has been marked for deletion.
ERROR_KEY_DELETED
1019
System could not allocate the required space in a registry log.
ERROR_NO_LOG_SPACE
1020
Cannot create a symbolic link in a registry key that already has subkeys or values.
ERROR_KEY_HAS_CHILDREN
1021
Cannot create a stable subkey under a volatile parent key.
ERROR_CHILD_MUST_BE_VOLATILE
1022
A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
ERROR_NOTIFY_ENUM_DIR
1051
A stop control has been sent to a service that other running services are dependent on.
ERROR_DEPENDENT_SERVICES_RUNNING
1052
The requested control is not valid for this service.
ERROR_INVALID_SERVICE_CONTROL
1053
The service did not respond to the start or control request in a timely fashion.
ERROR_SERVICE_REQUEST_TIMEOUT
1054
A thread could not be created for the service.
ERROR_SERVICE_NO_THREAD
1055
The service database is locked.
ERROR_SERVICE_DATABASE_LOCKED
1056
An instance of the service is already running.
ERROR_SERVICE_ALREADY_RUNNING
1057
The account name is invalid or does not exist.
ERROR_INVALID_SERVICE_ACCOUNT
1058
The specified service is disabled and cannot be started.
ERROR_SERVICE_DISABLED
1059
Circular service dependency was specified.
ERROR_CIRCULAR_DEPENDENCY
1060
The specified service does not exist as an installed service.
ERROR_SERVICE_DOES_NOT_EXIST
1061
The service cannot accept control messages at this time.
ERROR_SERVICE_CANNOT_ACCEPT_CTRL
1062
The service has not been started.
ERROR_SERVICE_NOT_ACTIVE
1063
The service process could not connect to the service controller.
ERROR_FAILED_SERVICE_CONTROLLER_CONNECT
1064
An exception occurred in the service when handling the control request.
ERROR_EXCEPTION_IN_SERVICE
1065
The database specified does not exist.
ERROR_DATABASE_DOES_NOT_EXIST
1066
The service has returned a service-specific error code.
ERROR_SERVICE_SPECIFIC_ERROR
1067
The process terminated unexpectedly.
ERROR_PROCESS_ABORTED
1068
The dependency service or group failed to start.
ERROR_SERVICE_DEPENDENCY_FAIL
1069
The service did not start due to a logon failure.
ERROR_SERVICE_LOGON_FAILED
1070
After starting, the service hung in a start-pending state.
ERROR_SERVICE_START_HANG
1071
The specified service database lock is invalid.
ERROR_INVALID_SERVICE_LOCK
1072
The specified service has been marked for deletion.
ERROR_SERVICE_MARKED_FOR_DELETE
1073
The specified service already exists.
ERROR_SERVICE_EXISTS
1074
The system is currently running with the last-known-good configuration.
ERROR_ALREADY_RUNNING_LKG
1075
The dependency service does not exist or has been marked for deletion.
ERROR_SERVICE_DEPENDENCY_DELETED
1076
The current boot has already been accepted for use as the last-known-good control set.
ERROR_BOOT_ALREADY_ACCEPTED
1077
No attempts to start the service have been made since the last boot.
ERROR_SERVICE_NEVER_STARTED
1078
The name is already in use as either a service name or a service display name.
ERROR_DUPLICATE_SERVICE_NAME
1079
The account specified for this service is different from the account specified for other services running in the same process.
ERROR_DIFFERENT_SERVICE_ACCOUNT
1100
The physical end of the tape has been reached.
ERROR_END_OF_MEDIA
1101
A tape access reached a filemark.
ERROR_FILEMARK_DETECTED
1102
The beginning of the tape or partition was encountered.
ERROR_BEGINNING_OF_MEDIA
1103
A tape access reached the end of a set of files.
ERROR_SETMARK_DETECTED
1104
No more data is on the tape.
ERROR_NO_DATA_DETECTED
1105
Tape could not be partitioned.
ERROR_PARTITION_FAILURE
1106
When accessing a new tape of a multivolume partition, the current block size is incorrect.
ERROR_INVALID_BLOCK_LENGTH
1107
Tape partition information could not be found when loading a tape.
ERROR_DEVICE_NOT_PARTITIONED
1108
Unable to lock the media eject mechanism.
ERROR_UNABLE_TO_LOCK_MEDIA
1109
Unable to unload the media.
ERROR_UNABLE_TO_UNLOAD_MEDIA
1110
The media in the drive may have changed.
ERROR_MEDIA_CHANGED
1111
The I/O bus was reset.
ERROR_BUS_RESET
1112
No media in drive.
ERROR_NO_MEDIA_IN_DRIVE
1113
No mapping for the Unicode character exists in the target multibyte code page.
ERROR_NO_UNICODE_TRANSLATION
1114
A dynamic link library (DLL) initialization routine failed.
ERROR_DLL_INIT_FAILED
1115
A system shutdown is in progress.
ERROR_SHUTDOWN_IN_PROGRESS
1116
Unable to abort the system shutdown because no shutdown was in progress.
ERROR_NO_SHUTDOWN_IN_PROGRESS
1117
The request could not be performed because of an I/O device error.
ERROR_IO_DEVICE
1118
No serial device was successfully initialized. The serial driver will unload.
ERROR_SERIAL_NO_DEVICE
1119
Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
ERROR_IRQ_BUSY
1120
A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
ERROR_MORE_WRITES
1121
A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
ERROR_COUNTER_TIMEOUT
1122
No ID address mark was found on the floppy disk.
ERROR_FLOPPY_ID_MARK_NOT_FOUND
1123
Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
ERROR_FLOPPY_WRONG_CYLINDER
1124
The floppy disk controller reported an error that is not recognized by the floppy disk driver.
ERROR_FLOPPY_UNKNOWN_ERROR
1125
The floppy disk controller returned inconsistent results in its registers.
ERROR_FLOPPY_BAD_REGISTERS
1126
While accessing the hard disk, a recalibrate operation failed, even after retries.
ERROR_DISK_RECALIBRATE_FAILED
1127
While accessing the hard disk, a disk operation failed even after retries.
ERROR_DISK_OPERATION_FAILED
1128
While accessing the hard disk, a disk controller reset was needed, but even that failed.
ERROR_DISK_RESET_FAILED
1129
Physical end of tape encountered.
ERROR_EOM_OVERFLOW
1130
Not enough server storage is available to process this command.
ERROR_NOT_ENOUGH_SERVER_MEMORY
1131
A potential deadlock condition has been detected.
ERROR_POSSIBLE_DEADLOCK
1132
The base address or the file offset specified does not have the proper alignment.
ERROR_MAPPED_ALIGNMENT
1140
An attempt to change the system power state was vetoed by another application or driver.
ERROR_SET_POWER_STATE_VETOED
1141
The system BIOS failed an attempt to change the system power state.
ERROR_SET_POWER_STATE_FAILED
1142
An attempt was made to create more links on a file than the file system supports.
ERROR_TOO_MANY_LINKS
1150
The specified program requires a newer version of Windows.
ERROR_OLD_WIN_VERSION
1151
The specified program is not a Windows or MS-DOS program.
ERROR_APP_WRONG_OS
1152
Cannot start more than one instance of the specified program.
ERROR_SINGLE_INSTANCE_APP
1153
The specified program was written for an earlier version of Windows.
ERROR_RMODE_APP
1154
One of the library files needed to run this application is damaged.
ERROR_INVALID_DLL
1155
No application is associated with the specified file for this operation.
ERROR_NO_ASSOCIATION
1156
An error occurred in sending the command to the application.
ERROR_DDE_FAIL
1157
One of the library files needed to run this application cannot be found.
ERROR_DLL_NOT_FOUND
1200
The specified device name is invalid.
ERROR_BAD_DEVICE
1201
The device is not currently connected but it is a remembered connection.
ERROR_CONNECTION_UNAVAIL
1202
An attempt was made to remember a device that had previously been remembered.
ERROR_DEVICE_ALREADY_REMEMBERED
1203
No network provider accepted the given network path.
ERROR_NO_NET_OR_BAD_PATH
1204
The specified network provider name is invalid.
ERROR_BAD_PROVIDER
1205
Unable to open the network connection profile.
ERROR_CANNOT_OPEN_PROFILE
1206
The network connection profile is corrupt.
ERROR_BAD_PROFILE
1207
Cannot enumerate a noncontainer.
ERROR_NOT_CONTAINER
1208
An extended error has occurred.
ERROR_EXTENDED_ERROR
1209
The format of the specified group name is invalid.
ERROR_INVALID_GROUPNAME
1210
The format of the specified computer name is invalid.
ERROR_INVALID_COMPUTERNAME
1211
The format of the specified event name is invalid.
ERROR_INVALID_EVENTNAME
1212
The format of the specified domain name is invalid.
ERROR_INVALID_DOMAINNAME
1213
The format of the specified service name is invalid.
ERROR_INVALID_SERVICENAME
1214
The format of the specified network name is invalid.
ERROR_INVALID_NETNAME
1215
The format of the specified share name is invalid.
ERROR_INVALID_SHARENAME
1216
The format of the specified password is invalid.
ERROR_INVALID_PASSWORDNAME
1217
The format of the specified message name is invalid.
ERROR_INVALID_MESSAGENAME
1218
The format of the specified message destination is invalid.
ERROR_INVALID_MESSAGEDEST
1219
The credentials supplied conflict with an existing set of credentials.
ERROR_SESSION_CREDENTIAL_CONFLICT
1220
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
1221
The workgroup or domain name is already in use by another computer on the network.
ERROR_DUP_DOMAINNAME
1222
The network is not present or not started.
ERROR_NO_NETWORK
1223
The operation was canceled by the user.
ERROR_CANCELLED
1224
The requested operation cannot be performed on a file with a user-mapped section open.
ERROR_USER_MAPPED_FILE
1225
The remote system refused the network connection.
ERROR_CONNECTION_REFUSED
1226
The network connection was gracefully closed.
ERROR_GRACEFUL_DISCONNECT
1227
The network transport endpoint already has an address associated with it.
ERROR_ADDRESS_ALREADY_ASSOCIATED
1228
An address has not yet been associated with the network endpoint.
ERROR_ADDRESS_NOT_ASSOCIATED
1229
An operation was attempted on a nonexistent network connection.
ERROR_CONNECTION_INVALID
1230
An invalid operation was attempted on an active network connection.
ERROR_CONNECTION_ACTIVE
1231
The remote network is not reachable by the transport.
ERROR_NETWORK_UNREACHABLE
1232
The remote system is not reachable by the transport.
ERROR_HOST_UNREACHABLE
1233
The remote system does not support the transport protocol.
ERROR_PROTOCOL_UNREACHABLE
1234
No service is operating at the destination network endpoint on the remote system.
ERROR_PORT_UNREACHABLE
1235
The request was aborted.
ERROR_REQUEST_ABORTED
1236
The network connection was aborted by the local system.
ERROR_CONNECTION_ABORTED
1237
The operation could not be completed. A retry should be performed.
ERROR_RETRY
1238
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
ERROR_CONNECTION_COUNT_LIMIT
1239
Attempting to log in during an unauthorized time of day for this account.
ERROR_LOGIN_TIME_RESTRICTION
1240
The account is not authorized to log in from this station.
ERROR_LOGIN_WKSTA_RESTRICTION
1241
The network address could not be used for the operation requested.
ERROR_INCORRECT_ADDRESS
1242
The service is already registered.
ERROR_ALREADY_REGISTERED
1243
The specified service does not exist.
ERROR_SERVICE_NOT_FOUND
1244
The operation being requested was not performed because the user has not been authenticated.
ERROR_NOT_AUTHENTICATED
1245
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.
ERROR_NOT_LOGGED_ON
1246
Caller to continue with work in progress.
ERROR_CONTINUE
1247
An attempt was made to perform an initialization operation when initialization has already been completed.
ERROR_ALREADY_INITIALIZED
1248
No more local devices.
ERROR_NO_MORE_DEVICES
1300
Not all privileges referenced are assigned to the caller.
ERROR_NOT_ALL_ASSIGNED
1301
Some mapping between account names and security IDs was not done.
ERROR_SOME_NOT_MAPPED
1302
No system quota limits are specifically set for this account.
ERROR_NO_QUOTAS_FOR_ACCOUNT
1303
No encryption key is available. A well-known encryption key was returned.
ERROR_LOCAL_USER_SESSION_KEY
1304
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
ERROR_NULL_LM_PASSWORD
1305
The revision level is unknown.
ERROR_UNKNOWN_REVISION
1306
Indicates two revision levels are incompatible.
ERROR_REVISION_MISMATCH
1307
This security ID may not be assigned as the owner of this object.
ERROR_INVALID_OWNER
1308
This security ID may not be assigned as the primary group of an object.
ERROR_INVALID_PRIMARY_GROUP
1309
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
ERROR_NO_IMPERSONATION_TOKEN
1310
The group may not be disabled.
ERROR_CANT_DISABLE_MANDATORY
1311
There are currently no logon servers available to service the logon request.
ERROR_NO_LOGON_SERVERS
1312
A specified logon session does not exist. It may already have been terminated.
ERROR_NO_SUCH_LOGON_SESSION
1313
A specified privilege does not exist.
ERROR_NO_SUCH_PRIVILEGE
1314
A required privilege is not held by the client.
ERROR_PRIVILEGE_NOT_HELD
1315
The name provided is not a properly formed account name.
ERROR_INVALID_ACCOUNT_NAME
1316
The specified user already exists.
ERROR_USER_EXISTS
1317
The specified user does not exist.
ERROR_NO_SUCH_USER
1318
The specified group already exists.
ERROR_GROUP_EXISTS
1319
The specified group does not exist.
ERROR_NO_SUCH_GROUP
1320
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
ERROR_MEMBER_IN_GROUP
1321
The specified user account is not a member of the specified group account.
ERROR_MEMBER_NOT_IN_GROUP
1322
The last remaining administration account cannot be disabled or deleted.
ERROR_LAST_ADMIN
1323
Unable to update the password. The value provided as the current password is incorrect.
ERROR_WRONG_PASSWORD
1324
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
ERROR_ILL_FORMED_PASSWORD
1325
Unable to update the password because a password update rule has been violated.
ERROR_PASSWORD_RESTRICTION
1326
Logon failure: unknown user name or bad password.
ERROR_LOGON_FAILURE
1327
Logon failure: user account restriction.
ERROR_ACCOUNT_RESTRICTION
1328
Logon failure: account logon time restriction violation.
ERROR_INVALID_LOGON_HOURS
1329
Logon failure: user not allowed to log on to this computer.
ERROR_INVALID_WORKSTATION
1330
Logon failure: the specified account password has expired.
ERROR_PASSWORD_EXPIRED
1331
Logon failure: account currently disabled.
ERROR_ACCOUNT_DISABLED
1332
No mapping between account names and security IDs was done.
ERROR_NONE_MAPPED
1333
Too many local user identifiers (LUIDs) were requested at one time.
ERROR_TOO_MANY_LUIDS_REQUESTED
1334
No more local user identifiers (LUIDs) are available.
ERROR_LUIDS_EXHAUSTED
1335
The subauthority part of a security ID is invalid for this particular use.
ERROR_INVALID_SUB_AUTHORITY
1336
The access control list (ACL) structure is invalid.
ERROR_INVALID_ACL
1337
The security ID structure is invalid.
ERROR_INVALID_SID
1338
The security descriptor structure is invalid.
ERROR_INVALID_SECURITY_DESCR
1340
The inherited access control list (ACL) or access control entry (ACE) could not be built.
ERROR_BAD_INHERITANCE_ACL
1341
The server is currently disabled.
ERROR_SERVER_DISABLED
1342
The server is currently enabled.
ERROR_SERVER_NOT_DISABLED
1343
The value provided was an invalid value for an identifier authority.
ERROR_INVALID_ID_AUTHORITY
1344
No more memory is available for security information updates.
ERROR_ALLOTTED_SPACE_EXCEEDED
1345
The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
ERROR_INVALID_GROUP_ATTRIBUTES
1346
Either a required impersonation level was not provided, or the provided impersonation level is invalid.
ERROR_BAD_IMPERSONATION_LEVEL
1347
Cannot open an anonymous level security token.
ERROR_CANT_OPEN_ANONYMOUS
1348
The validation information class requested was invalid.
ERROR_BAD_VALIDATION_CLASS
1349
The type of the token is inappropriate for its attempted use.
ERROR_BAD_TOKEN_TYPE
1350
Unable to perform a security operation on an object that has no associated security.
ERROR_NO_SECURITY_ON_OBJECT
1351
Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.
ERROR_CANT_ACCESS_DOMAIN_INFO
1352
The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
ERROR_INVALID_SERVER_STATE
1353
The domain was in the wrong state to perform the security operation.
ERROR_INVALID_DOMAIN_STATE
1354
This operation is only allowed for the Primary Domain Controller of the domain.
ERROR_INVALID_DOMAIN_ROLE
1355
The specified domain did not exist.
ERROR_NO_SUCH_DOMAIN
1356
The specified domain already exists.
ERROR_DOMAIN_EXISTS
1357
An attempt was made to exceed the limit on the number of domains per server.
ERROR_DOMAIN_LIMIT_EXCEEDED
1358
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
ERROR_INTERNAL_DB_CORRUPTION
1359
The security account database contains an internal inconsistency.
ERROR_INTERNAL_ERROR
1360
Generic access types were contained in an access mask which should already be mapped to nongeneric types.
ERROR_GENERIC_NOT_MAPPED
1361
A security descriptor is not in the right format (absolute or self-relative).
ERROR_BAD_DESCRIPTOR_FORMAT
1362
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
ERROR_NOT_LOGON_PROCESS
1363
Cannot start a new logon session with an ID that is already in use.
ERROR_LOGON_SESSION_EXISTS
1364
A specified authentication package is unknown.
ERROR_NO_SUCH_PACKAGE
1365
The logon session is not in a state that is consistent with the requested operation.
ERROR_BAD_LOGON_SESSION_STATE
1366
The logon session ID is already in use.
ERROR_LOGON_SESSION_COLLISION
1367
A logon request contained an invalid logon type value.
ERROR_INVALID_LOGON_TYPE
1368
Unable to impersonate using a named pipe until data has been read from that pipe.
ERROR_CANNOT_IMPERSONATE
1369
The transaction state of a registry subtree is incompatible with the requested operation.
ERROR_RXACT_INVALID_STATE
1370
An internal security database corruption has been encountered.
ERROR_RXACT_COMMIT_FAILURE
1371
Cannot perform this operation on built-in accounts.
ERROR_SPECIAL_ACCOUNT
1372
Cannot perform this operation on this built-in special group.
ERROR_SPECIAL_GROUP
1373
Cannot perform this operation on this built-in special user.
ERROR_SPECIAL_USER
1374
The user cannot be removed from a group because the group is currently the user's primary group.
ERROR_MEMBERS_PRIMARY_GROUP
1375
The token is already in use as a primary token.
ERROR_TOKEN_ALREADY_IN_USE
1376
The specified local group does not exist.
ERROR_NO_SUCH_ALIAS
1377
The specified account name is not a member of the local group.
ERROR_MEMBER_NOT_IN_ALIAS
1378
The specified account name is already a member of the local group.
ERROR_MEMBER_IN_ALIAS
1379
The specified local group already exists.
ERROR_ALIAS_EXISTS
1380
Logon failure: the user has not been granted the requested logon type at this computer.
ERROR_LOGON_NOT_GRANTED
1381
The maximum number of secrets that may be stored in a single system has been exceeded.
ERROR_TOO_MANY_SECRETS
1382
The length of a secret exceeds the maximum length allowed.
ERROR_SECRET_TOO_LONG
1383
The local security authority database contains an internal inconsistency.
ERROR_INTERNAL_DB_ERROR
1384
During a logon attempt, the user's security context accumulated too many security IDs.
ERROR_TOO_MANY_CONTEXT_IDS
1385
Logon failure: the user has not been granted the requested logon type at this computer.
ERROR_LOGON_TYPE_NOT_GRANTED
1386
A cross-encrypted password is necessary to change a user password.
ERROR_NT_CROSS_ENCRYPTION_REQUIRED
1387
A new member could not be added to a local group because the member does not exist.
ERROR_NO_SUCH_MEMBER
1388
A new member could not be added to a local group because the member has the wrong account type.
ERROR_INVALID_MEMBER
1389
Too many security IDs have been specified.
ERROR_TOO_MANY_SIDS
1390
A cross-encrypted password is necessary to change this user password.
ERROR_LM_CROSS_ENCRYPTION_REQUIRED
1391
Indicates an ACL contains no inheritable components.
ERROR_NO_INHERITANCE
1392
The file or directory is corrupted and non-readable.
ERROR_FILE_CORRUPT
1393
The disk structure is corrupted and non-readable.
ERROR_DISK_CORRUPT
1394
There is no user session key for the specified logon session.
ERROR_NO_USER_SESSION_KEY
1395
The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.
ERROR_LICENSE_QUOTA_EXCEEDED
1400
Invalid window handle.
ERROR_INVALID_WINDOW_HANDLE
1401
Invalid menu handle.
ERROR_INVALID_MENU_HANDLE
1402
Invalid cursor handle.
ERROR_INVALID_CURSOR_HANDLE
1403
Invalid accelerator table handle.
ERROR_INVALID_ACCEL_HANDLE
1404
Invalid hook handle.
ERROR_INVALID_HOOK_HANDLE
1405
Invalid handle to a multiple-window position structure.
ERROR_INVALID_DWP_HANDLE
1406
Cannot create a top-level child window.
ERROR_TLW_WITH_WSCHILD
1407
Cannot find window class.
ERROR_CANNOT_FIND_WND_CLASS
1408
Invalid window, it belongs to another thread.
ERROR_WINDOW_OF_OTHER_THREAD
1409
Hot key is already registered.
ERROR_HOTKEY_ALREADY_REGISTERED
1410
Class already exists.
ERROR_CLASS_ALREADY_EXISTS
1411
Class does not exist.
ERROR_CLASS_DOES_NOT_EXIST
1412
Class still has open windows.
ERROR_CLASS_HAS_WINDOWS
1413
Invalid index.
ERROR_INVALID_INDEX
1414
Invalid icon handle.
ERROR_INVALID_ICON_HANDLE
1415
Using private DIALOG window words.
ERROR_PRIVATE_DIALOG_INDEX
1416
The list box identifier was not found.
ERROR_LISTBOX_ID_NOT_FOUND
1417
No wildcards were found.
ERROR_NO_WILDCARD_CHARACTERS
1418
Thread does not have a clipboard open.
ERROR_CLIPBOARD_NOT_OPEN
1419
Hot key is not registered.
ERROR_HOTKEY_NOT_REGISTERED
1420
The window is not a valid dialog window.
ERROR_WINDOW_NOT_DIALOG
1421
Control ID not found.
ERROR_CONTROL_ID_NOT_FOUND
1422
Invalid message for a combo box because it does not have an edit control.
ERROR_INVALID_COMBOBOX_MESSAGE
1423
The window is not a combo box.
ERROR_WINDOW_NOT_COMBOBOX
1424
Height must be less than 256.
ERROR_INVALID_EDIT_HEIGHT
1425
Invalid device context (DC) handle.
ERROR_DC_NOT_FOUND
1426
Invalid hook procedure type.
ERROR_INVALID_HOOK_FILTER
1427
Invalid hook procedure.
ERROR_INVALID_FILTER_PROC
1428
Cannot set nonlocal hook without a module handle.
ERROR_HOOK_NEEDS_HMOD
1429
This hook procedure can only be set globally.
ERROR_GLOBAL_ONLY_HOOK
1430
The journal hook procedure is already installed.
ERROR_JOURNAL_HOOK_SET
1431
The hook procedure is not installed.
ERROR_HOOK_NOT_INSTALLED
1432
Invalid message for single-selection list box.
ERROR_INVALID_LB_MESSAGE
1433
LB_SETCOUNT sent to non-lazy list box.
ERROR_SETCOUNT_ON_BAD_LB
1434
This list box does not support tab stops.
ERROR_LB_WITHOUT_TABSTOPS
1435
Cannot destroy object created by another thread.
ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
1436
Child windows cannot have menus.
ERROR_CHILD_WINDOW_MENU
1437
The window does not have a system menu.
ERROR_NO_SYSTEM_MENU
1438
Invalid message box style.
ERROR_INVALID_MSGBOX_STYLE
1439
Invalid system-wide (SPI_*) parameter.
ERROR_INVALID_SPI_VALUE
1440
Screen already locked.
ERROR_SCREEN_ALREADY_LOCKED
1441
All handles to windows in a multiple-window position structure must have the same parent.
ERROR_HWNDS_HAVE_DIFF_PARENT
1442
The window is not a child window.
ERROR_NOT_CHILD_WINDOW
1443
Invalid GW_* command.
ERROR_INVALID_GW_COMMAND
1444
Invalid thread identifier.
ERROR_INVALID_THREAD_ID
1445
Cannot process a message from a window that is not a multiple document interface (MDI) window.
ERROR_NON_MDICHILD_WINDOW
1446
Popup menu already active.
ERROR_POPUP_ALREADY_ACTIVE
1447
The window does not have scroll bars.
ERROR_NO_SCROLLBARS
1448
Scroll bar range cannot be greater than 0x7FFF.
ERROR_INVALID_SCROLLBAR_RANGE
1449
Cannot show or remove the window in the way specified.
ERROR_INVALID_SHOWWIN_COMMAND
1450
Insufficient system resources exist to complete the requested service.
ERROR_NO_SYSTEM_RESOURCES
1451
Insufficient system resources exist to complete the requested service.
ERROR_NONPAGED_SYSTEM_RESOURCES
1452
Insufficient system resources exist to complete the requested service.
ERROR_PAGED_SYSTEM_RESOURCES
1453
Insufficient quota to complete the requested service.
ERROR_WORKING_SET_QUOTA
1454
Insufficient quota to complete the requested service.
ERROR_PAGEFILE_QUOTA
1455
The paging file is too small for this operation to complete.
ERROR_COMMITMENT_LIMIT
1456
A menu item was not found.
ERROR_MENU_ITEM_NOT_FOUND
1457
Invalid keyboard layout handle.
ERROR_INVALID_KEYBOARD_HANDLE
1458
Hook type not allowed.
ERROR_HOOK_TYPE_NOT_ALLOWED
1459
This operation requires an interactive window station.
ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION
1460
This operation returned because the time-out period expired.
ERROR_TIMEOUT
1500
The event log file is corrupted.
ERROR_EVENTLOG_FILE_CORRUPT
1501
No event log file could be opened, so the event logging service did not start.
ERROR_EVENTLOG_CANT_START
1502
The event log file is full.
ERROR_LOG_FILE_FULL
1503
The event log file has changed between read operations.
ERROR_EVENTLOG_FILE_CHANGED
1700
The string binding is invalid.
RPC_S_INVALID_STRING_BINDING
1701
The binding handle is not the correct type.
RPC_S_WRONG_KIND_OF_BINDING
1702
The binding handle is invalid.
RPC_S_INVALID_BINDING
1703
The RPC protocol sequence is not supported.
RPC_S_PROTSEQ_NOT_SUPPORTED
1704
The RPC protocol sequence is invalid.
RPC_S_INVALID_RPC_PROTSEQ
1705
The string universal unique identifier (UUID) is invalid.
RPC_S_INVALID_STRING_UUID
1706
The endpoint format is invalid.
RPC_S_INVALID_ENDPOINT_FORMAT
1707
The network address is invalid.
RPC_S_INVALID_NET_ADDR
1708
No endpoint was found.
RPC_S_NO_ENDPOINT_FOUND
1709
The time-out value is invalid.
RPC_S_INVALID_TIMEOUT
1710
The object universal unique identifier (UUID) was not found.
RPC_S_OBJECT_NOT_FOUND
1711
The object universal unique identifier (UUID) has already been registered.
RPC_S_ALREADY_REGISTERED
1712
The type universal unique identifier (UUID) has already been registered.
RPC_S_TYPE_ALREADY_REGISTERED
1713
The RPC server is already listening.
RPC_S_ALREADY_LISTENING
1714
No protocol sequences have been registered.
RPC_S_NO_PROTSEQS_REGISTERED
1715
The RPC server is not listening.
RPC_S_NOT_LISTENING
1716
The manager type is unknown.
RPC_S_UNKNOWN_MGR_TYPE
1717
The interface is unknown.
RPC_S_UNKNOWN_IF
1718
There are no bindings.
RPC_S_NO_BINDINGS
1719
There are no protocol sequences.
RPC_S_NO_PROTSEQS
1720
The endpoint cannot be created.
RPC_S_CANT_CREATE_ENDPOINT
1721
Not enough resources are available to complete this operation.
RPC_S_OUT_OF_RESOURCES
1722
The RPC server is unavailable.
RPC_S_SERVER_UNAVAILABLE
1723
The RPC server is too busy to complete this operation.
RPC_S_SERVER_TOO_BUSY
1724
The network options are invalid.
RPC_S_INVALID_NETWORK_OPTIONS
1725
There is not a remote procedure call active in this thread.
RPC_S_NO_CALL_ACTIVE
1726
The remote procedure call failed.
RPC_S_CALL_FAILED
1727
The remote procedure call failed and did not execute.
RPC_S_CALL_FAILED_DNE
1728
A remote procedure call (RPC) protocol error occurred.
RPC_S_PROTOCOL_ERROR
1730
The transfer syntax is not supported by the RPC server.
RPC_S_UNSUPPORTED_TRANS_SYN
1732
The universal unique identifier (UUID) type is not supported.
RPC_S_UNSUPPORTED_TYPE
1733
The tag is invalid.
RPC_S_INVALID_TAG
1734
The array bounds are invalid.
RPC_S_INVALID_BOUND
1735
The binding does not contain an entry name.
RPC_S_NO_ENTRY_NAME
1736
The name syntax is invalid.
RPC_S_INVALID_NAME_SYNTAX
1737
The name syntax is not supported.
RPC_S_UNSUPPORTED_NAME_SYNTAX
1739
No network address is available to use to construct a universal unique identifier (UUID).
RPC_S_UUID_NO_ADDRESS
1740
The endpoint is a duplicate.
RPC_S_DUPLICATE_ENDPOINT
1741
The authentication type is unknown.
RPC_S_UNKNOWN_AUTHN_TYPE
1742
The maximum number of calls is too small.
RPC_S_MAX_CALLS_TOO_SMALL
1743
The string is too long.
RPC_S_STRING_TOO_LONG
1744
The RPC protocol sequence was not found.
RPC_S_PROTSEQ_NOT_FOUND
1745
The procedure number is out of range.
RPC_S_PROCNUM_OUT_OF_RANGE
1746
The binding does not contain any authentication information.
RPC_S_BINDING_HAS_NO_AUTH
1747
The authentication service is unknown.
RPC_S_UNKNOWN_AUTHN_SERVICE
1748
The authentication level is unknown.
RPC_S_UNKNOWN_AUTHN_LEVEL
1749
The security context is invalid.
RPC_S_INVALID_AUTH_IDENTITY
1750
The authorization service is unknown.
RPC_S_UNKNOWN_AUTHZ_SERVICE
1751
The entry is invalid.
EPT_S_INVALID_ENTRY
1752
The server endpoint cannot perform the operation.
EPT_S_CANT_PERFORM_OP
1753
There are no more endpoints available from the endpoint mapper.
EPT_S_NOT_REGISTERED
1754
No interfaces have been exported.
RPC_S_NOTHING_TO_EXPORT
1755
The entry name is incomplete.
RPC_S_INCOMPLETE_NAME
1756
The version option is invalid.
RPC_S_INVALID_VERS_OPTION
1757
There are no more members.
RPC_S_NO_MORE_MEMBERS
1758
There is nothing to unexport.
RPC_S_NOT_ALL_OBJS_UNEXPORTED
1759
The interface was not found.
RPC_S_INTERFACE_NOT_FOUND
1760
The entry already exists.
RPC_S_ENTRY_ALREADY_EXISTS
1761
The entry is not found.
RPC_S_ENTRY_NOT_FOUND
1762
The name service is unavailable.
RPC_S_NAME_SERVICE_UNAVAILABLE
1763
The network address family is invalid.
RPC_S_INVALID_NAF_ID
1764
The requested operation is not supported.
RPC_S_CANNOT_SUPPORT
1765
No security context is available to allow impersonation.
RPC_S_NO_CONTEXT_AVAILABLE
1766
An internal error occurred in a remote procedure call (RPC).
RPC_S_INTERNAL_ERROR
1767
The RPC server attempted an integer division by zero.
RPC_S_ZERO_DIVIDE
1768
An addressing error occurred in the RPC server.
RPC_S_ADDRESS_ERROR
1769
A floating-point operation at the RPC server caused a division by zero.
RPC_S_FP_DIV_ZERO
1770
A floating-point underflow occurred at the RPC server.
RPC_S_FP_UNDERFLOW
1771
A floating-point overflow occurred at the RPC server.
RPC_S_FP_OVERFLOW
1772
The list of RPC servers available for the binding of auto handles has been exhausted.
RPC_X_NO_MORE_ENTRIES
1773
Unable to open the character translation table file.
RPC_X_SS_CHAR_TRANS_OPEN_FAIL
1774
The file containing the character translation table has fewer than 512 bytes.
RPC_X_SS_CHAR_TRANS_SHORT_FILE
1775
A null context handle was passed from the client to the host during a remote procedure call.
RPC_X_SS_IN_NULL_CONTEXT
1777
The context handle changed during a remote procedure call.
RPC_X_SS_CONTEXT_DAMAGED
1778
The binding handles passed to a remote procedure call do not match.
RPC_X_SS_HANDLES_MISMATCH
1779
The stub is unable to get the remote procedure call handle.
RPC_X_SS_CANNOT_GET_CALL_HANDLE
1780
A null reference pointer was passed to the stub.
RPC_X_NULL_REF_POINTER
1781
The enumeration value is out of range.
RPC_X_ENUM_VALUE_OUT_OF_RANGE
1782
The byte count is too small.
RPC_X_BYTE_COUNT_TOO_SMALL
1783
The stub received bad data.
RPC_X_BAD_STUB_DATA
1784
The supplied user buffer is not valid for the requested operation.
ERROR_INVALID_USER_BUFFER
1785
The disk media is not recognized. It may not be formatted.
ERROR_UNRECOGNIZED_MEDIA
1786
The workstation does not have a trust secret.
ERROR_NO_TRUST_LSA_SECRET
1787
The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship.
ERROR_NO_TRUST_SAM_ACCOUNT
1788
The trust relationship between the primary domain and the trusted domain failed.
ERROR_TRUSTED_DOMAIN_FAILURE
1789
The trust relationship between this workstation and the primary domain failed.
ERROR_TRUSTED_RELATIONSHIP_FAILURE
1790
The network logon failed.
ERROR_TRUST_FAILURE
1791
A remote procedure call is already in progress for this thread.
RPC_S_CALL_IN_PROGRESS
1792
An attempt was made to logon, but the network logon service was not started.
ERROR_NETLOGON_NOT_STARTED
1793
The user's account has expired.
ERROR_ACCOUNT_EXPIRED
1794
The redirector is in use and cannot be unloaded.
ERROR_REDIRECTOR_HAS_OPEN_HANDLES
1795
The specified printer driver is already installed.
ERROR_PRINTER_DRIVER_ALREADY_INSTALLED
1796
The specified port is unknown.
ERROR_UNKNOWN_PORT
1797
The printer driver is unknown.
ERROR_UNKNOWN_PRINTER_DRIVER
1798
The print processor is unknown.
ERROR_UNKNOWN_PRINTPROCESSOR
1799
The specified separator file is invalid.
ERROR_INVALID_SEPARATOR_FILE
1800
The specified priority is invalid.
ERROR_INVALID_PRIORITY
1801
The printer name is invalid.
ERROR_INVALID_PRINTER_NAME
1802
The printer already exists.
ERROR_PRINTER_ALREADY_EXISTS
1803
The printer command is invalid.
ERROR_INVALID_PRINTER_COMMAND
1804
The specified data type is invalid.
ERROR_INVALID_DATATYPE
1805
The environment specified is invalid.
ERROR_INVALID_ENVIRONMENT
1806
There are no more bindings.
RPC_S_NO_MORE_BINDINGS
1807
The account used is an interdomain trust account. Use your global user account or local user account to access this server.
ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
1808
The account used is a computer account. Use your global user account or local user account to access this server.
ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT
1809
The account used is a server trust account. Use your global user account or local user account to access this server.
ERROR_NOLOGON_SERVER_TRUST_ACCOUNT
1810
The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain.
ERROR_DOMAIN_TRUST_INCONSISTENT
1811
The server is in use and cannot be unloaded.
ERROR_SERVER_HAS_OPEN_HANDLES
1812
The specified image file did not contain a resource section.
ERROR_RESOURCE_DATA_NOT_FOUND
1813
The specified resource type cannot be found in the image file.
ERROR_RESOURCE_TYPE_NOT_FOUND
1814
The specified resource name cannot be found in the image file.
ERROR_RESOURCE_NAME_NOT_FOUND
1815
The specified resource language ID cannot be found in the image file.
ERROR_RESOURCE_LANG_NOT_FOUND
1816
Not enough quota is available to process this command.
ERROR_NOT_ENOUGH_QUOTA
1817
No interfaces have been registered.
RPC_S_NO_INTERFACES
1818
The server was altered while processing this call.
RPC_S_CALL_CANCELLED
1819
The binding handle does not contain all required information.
RPC_S_BINDING_INCOMPLETE
1820
Communications failure.
RPC_S_COMM_FAILURE
1821
The requested authentication level is not supported.
RPC_S_UNSUPPORTED_AUTHN_LEVEL
1822
No principal name registered.
RPC_S_NO_PRINC_NAME
1823
The error specified is not a valid Windows NT RPC error code.
RPC_S_NOT_RPC_ERROR
1824
A UUID that is valid only on this computer has been allocated.
RPC_S_UUID_LOCAL_ONLY
1825
A security package specific error occurred.
RPC_S_SEC_PKG_ERROR
1826
Thread is not canceled.
RPC_S_NOT_CANCELLED
1827
Invalid operation on the encoding/decoding handle.
RPC_X_INVALID_ES_ACTION
1828
Incompatible version of the serializing package.
RPC_X_WRONG_ES_VERSION
1829
Incompatible version of the RPC stub.
RPC_X_WRONG_STUB_VERSION
1830
The idl pipe object is invalid or corrupted.
RPC_X_INVALID_PIPE_OBJECT
1831
The operation is invalid for a given idl pipe object.
RPC_X_INVALID_PIPE_OPERATION
1832
The idl pipe version is not supported.
RPC_X_WRONG_PIPE_VERSION
1898
The group member was not found.
RPC_S_GROUP_MEMBER_NOT_FOUND
1899
The endpoint mapper database could not be created.
EPT_S_CANT_CREATE
1900
The object universal unique identifier (UUID) is the nil UUID.
RPC_S_INVALID_OBJECT
1901
The specified time is invalid.
ERROR_INVALID_TIME
1902
The specified form name is invalid.
ERROR_INVALID_FORM_NAME
1903
The specified form size is invalid.
ERROR_INVALID_FORM_SIZE
1904
The specified printer handle is already being waited on
ERROR_ALREADY_WAITING
1905
The specified printer has been deleted.
ERROR_PRINTER_DELETED
1906
The state of the printer is invalid.
ERROR_INVALID_PRINTER_STATE
1907
The user must change his password before he logs on the first time.
ERROR_PASSWORD_MUST_CHANGE
1908
Could not find the domain controller for this domain.
ERROR_DOMAIN_CONTROLLER_NOT_FOUND
1909
The referenced account is currently locked out and may not be logged on to.
ERROR_ACCOUNT_LOCKED_OUT
1910
The object exporter specified was not found.
OR_INVALID_OXID
1911
The object specified was not found.
OR_INVALID_OID
1912
The object resolver set specified was not found.
OR_INVALID_SET
1913
Some data remains to be sent in the request buffer.
RPC_S_SEND_INCOMPLETE
2000
The pixel format is invalid.
ERROR_INVALID_PIXEL_FORMAT
2001
The specified driver is invalid.
ERROR_BAD_DRIVER
2002
The window style or class attribute is invalid for this operation.
ERROR_INVALID_WINDOW_STYLE
2003
The requested metafile operation is not supported.
ERROR_METAFILE_NOT_SUPPORTED
2004
The requested transformation operation is not supported.
ERROR_TRANSFORM_NOT_SUPPORTED
2005
The requested clipping operation is not supported.
ERROR_CLIPPING_NOT_SUPPORTED
2202
The specified user name is invalid.
ERROR_BAD_USERNAME
2250
This network connection does not exist.
ERROR_NOT_CONNECTED
2401
This network connection has files open or requests pending.
ERROR_OPEN_FILES
2402
Active connections still exist.
ERROR_ACTIVE_CONNECTIONS
2404
The device is in use by an active process and cannot be disconnected.
ERROR_DEVICE_IN_USE
3000
The specified print monitor is unknown.
ERROR_UNKNOWN_PRINT_MONITOR
3001
The specified printer driver is currently in use.
ERROR_PRINTER_DRIVER_IN_USE
3002
The spool file was not found.
ERROR_SPOOL_FILE_NOT_FOUND
3003
A StartDocPrinter call was not issued.
ERROR_SPL_NO_STARTDOC
3004
An AddJob call was not issued.
ERROR_SPL_NO_ADDJOB
3005
The specified print processor has already been installed.
ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED
3006
The specified print monitor has already been installed.
ERROR_PRINT_MONITOR_ALREADY_INSTALLED
3007
The specified print monitor does not have the required functions.
ERROR_INVALID_PRINT_MONITOR
3008
The specified print monitor is currently in use.
ERROR_PRINT_MONITOR_IN_USE
3009
The requested operation is not allowed when there are jobs queued to the printer.
ERROR_PRINTER_HAS_JOBS_QUEUED
3010
The requested operation is successful. Changes will not be effective until the system is rebooted.
ERROR_SUCCESS_REBOOT_REQUIRED
3011
The requested operation is successful. Changes will not be effective until the service is restarted.
ERROR_SUCCESS_RESTART_REQUIRED
4000
WINS encountered an error while processing the command.
ERROR_WINS_INTERNAL
4001
The local WINS can not be deleted.
ERROR_CAN_NOT_DEL_LOCAL_WINS
4002
The importation from the file failed.
ERROR_STATIC_INIT
4003
The backup failed. Was a full backup done before?
ERROR_INC_BACKUP
4004
The backup failed. Check the directory to which you are backing the database.
ERROR_FULL_BACKUP
4005
The name does not exist in the WINS database.
ERROR_REC_NON_EXISTENT
4006
Replication with a nonconfigured partner is not allowed.
ERROR_RPL_NOT_ALLOWED
6118
The list of servers for this workgroup is not currently available
ERROR_NO_BROWSER_SERVERS_FOUND
10053
Connection aborted. (An established connection was aborted by the software in your host machine.)
WSAECONNABORTED
10054
Connection reset by peer. (An existing connection was forcibly closed by the remote host)
WSAECONNRESETOperating System Error Codes
-
diegolenhardt
- Moderador
- Mensagens: 1177
- Registrado em: Qui, 15 Out 2009 10:28 am
- Localização: Recife
As vezes recebemos mensagem de erro em aplicativos, porem são mensagens do sistema operacional, como I/O Error 51, por exemplo, abaixo uma tabela com todos:
-
victorhugomuniz
- Moderador
- Mensagens: 1396
- Registrado em: Sex, 01 Fev 2008 2:06 pm
- Localização: Rio de Janeiro - RJ
- Contato:
grato pela contribuição
-
lincolnrn
- Rank: Estagiário Sênior
- Mensagens: 13
- Registrado em: Ter, 05 Jan 2010 9:41 am
- Localização: Contagem-MG
- Contato:
Lincoln Rocha Nogueira
www.tecconect.com
www.tecconect.com
Me da uma Luz como resolver o 1019 to apanhando aqui...
-
diegolenhardt
- Moderador
- Mensagens: 1177
- Registrado em: Qui, 15 Out 2009 10:28 am
- Localização: Recife
não é espaço em disco?
-
- Informação
-
Quem está online
Usuários navegando neste fórum: Nenhum usuário registrado e 1 visitante
